Invacare 2218 Manual Do Utilizador

Página de 4
Part No. 1114827 Rev A
1
Telescoping I.V. Rod
TELESCOPING I.V. ROD (MODEL 2218)
  Assembly, Installation and Operating Instructions
Kit No. 1101760
SAVE THESE INSTRUCTIONS
NOTE:  Check  ALL  parts  for  shipping  damage.  In  case  of  shipping  damage,  DO  NOT  use.  Contact
Carrier/  Dealer  for  further  instruction.
SAFETY  SUMMARY
To ensure the safe installation and adjustment of the Telescoping I.V. Rod Kit,
these instructions MUST be followed:
GENERAL WARNINGS
DO NOT install or use this equipment without first reading and understand-
ing this instruction sheet. If you are unable to understand the Warnings,
Cautions or Instructions, contact a healthcare professional, dealer or techni-
cal personnel before attempting to install this equipment – otherwise, injury
or damage may occur.
DO NOT pull/push the wheelchair by the I.V. rod assembly. Injury to the
assistant/occupant and/or damage to the I.V. rod assembly may occur.
DO NOT place any objects on the I.V. rod assembly other than those
determined by a healthcare professional.
INSTALLATION WARNING
After any adjustments, repair or service and BEFORE use, make sure all
attaching hardware is securely tightened – otherwise injury or damage may
result.
This kit contains the following items:
DESCRIPTION
QUANTITY
Telescoping I.V. Rod
1
Hex Screw
1
Large Locknut
1
Pan Head Screw
1
Small Locknut
1
I. V. Rod Mounting Bracket
1
Spacer
1
Insert*
1
NOTE: The I.V. Rod can be installed to either the right or left side of the wheelchair. The right side
installation is shown in all figures. The left side installs in a similar manner.
*NOTE: The Insert is only used with wheelchairs that have 7/8 inch diameter rear step tubes.