Vivitek dx6851 Manual Do Utilizador

DU6871/DW6851/DX6831 DLP Projector - User's Manual

OSD Menu - LAMP

Mode
Power

Lamp 1 Status

High Altitude

Custom Power Level

Enter

Lamp 2 Status

< -------- >

< Off >

Eco

On
Off

INPUT

SERVICE

ALIGNMENT

CONTROL

LAMP

PICTURE

•

Mode

Use the ◄► function to select the single-lamp or dual-lamp mode.

Dual: Enable the dual-lamp projection mode�

Lamp 1: Use Lamp 1 for projection� The system switches to Lamp 2 if Lamp 1 is

abnormal in activation�

Lamp 2: Use Lamp 2 for projection� The system switches to Lamp 1 if Lamp 2 is

abnormal in activation�

Single: Use the single-lamp mode for the projection� The lamp is not specified in this

mode, the projector selects the lamp that has the least operation hours automatically

whenever it is turned on�

Note:

1. In the Lamp 1 or Lamp 2 mode, the projector will switch to another lamp when the set lamp becomes

abnormal. The corresponding LED indicator of the lamp will flash simultaneously for seconds and light up.

2. When the lamp mode is set to Single, the setting will become valid upon turn-on of the projector next time.

3. Quick switch of the lamp mode may affect the life of the lamp. The projector will disable the lamp mode

function (highlighted) every time when a switch is conducted till the switch of the lamp mode is completed.

The lamp mode options are not available before the switch of the lamp mode is completed.

•

Power

Use the ◄► function to select the ECO, Normal or Custom Power Level mode.

Normal: Projection is carried out using the normal lamp power to obtain the brightest

projection display�

ECO: Projection is carried out in the energy saving mode to ensure the longest service

life of the lamp�

Custom Power Level: In addition to the Normal and ECO modes, the lamp power

equal to 100% to 75% of the power in the Normal mode is used for fine-tune of the

brightness in the Custom Power Level mode� This function can be used for quick

installation and routine maintenance in multi-projector applications� Select this mode to

enable the Custom Power Level function�