Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Vivitek
  4. dx6851
  5. Manual Do Utilizador

Vivitek dx6851 Manual Do Utilizador

Download
Página de 54
41
DU6871/DW6851/DX6831 DLP Projector - User's Manual
HDBaseT: Transmission is conducted from the external HDBaseT to the RJ-45/
HDBaseT port on the projector� The transmission rate is switched to 9600�
Note:
•  When the Standby Mode is set to the Eco Mode, the LAN and RS-232 control function is turned off.
Therefore, the projector can only be turned on using the remote control or the button on the projector.
Before using RS232 or LAN control, set the Standby Mode to Standard.
• 
Startup Logo
Use the ◄► function to turn on/off the Startup Logo.
• 
Trigger
The projector is provided with a set of trigger output� When automatic screen equipment 
is available, connect it to the screen trigger of the projector using the cable� The screen 
automatically turns on when the projector is powered on� There is a 2-3 second delay 
before this function is activated�
5:4: When the 5:4 aspect ratio is selected, the trigger outputs 12V power�
4:3: When the 4:3 aspect ratio is selected, the trigger outputs 12V power�
16:10: When the 16:10 aspect ratio is selected, the trigger outputs 12V power�
16:9: When the 16:9 aspect ratio is selected, the trigger outputs 12V power�
1�88: When the 1�88 aspect ratio is selected, the trigger outputs 12V power�
2�35: When the 2�35 aspect ratio is selected, the trigger outputs 12V power�
Letterbox: When the aspect ratio having the letterbox shape is selected, the trigger 
outputs 12V power�
Standard: When the native aspect ratio is selected, the trigger outputs 12V power�
Unscaled: When the unscaled aspect ratio is selected, the trigger outputs 12V power�
Auto: The trigger automatically outputs 12V power�
• 
Auto Search
Use the ◄► function to turn on/off Auto Search.
• 
Dynamic Black
Use the ◄► function to turn on/off Dynamic Black.
• 
3D
Set the 3D format and sync method� The projector detects the type of the connected 
input signal and provides relevant options for setting� The unavailable option is displayed 
using light green texts� Before performing the 3D setting, ensure that the input signal is 
connected� When there's no input signal, no 3D setting shall be performed�
 
INPUT
SERVICE
ALIGNMENT
LAMP
PICTURE
DLP Link
3D Swap
3D 24Hz Display
3D Format
Off
Auto
Side by Side
Top / Bottom
Standby Mode
Auto Power off
Network
Auto Power On
Startup Logo
RS232
Trigger
<           Off             >
Enter
Dynamic Black
Auto Search
Language
3D
<          Off            >
<           Off            >
Enter
Enter
<      Standard        >
<            Off            >
Enter
<           Off            >
<           Off            >
<            On            >
Execute
Execute
Execute
Execute
Frame Sequential
Execute
<        Normal         >
<          96Hz          >
CONTROL
3D Format
Enter
3D