RCA Model 21011 Manual Do Utilizador

1. Make sure the phone is OFF (not in TALK mode).

2. Press the DIR soft key.

3. Press any number key (01-50) to store the phone number in that

memory location, or press the cid/vol (up and down arrow) button on
the handset or CID (up and down arrow) button on the base to select the
memory location.

4. Press the EDIT soft key and 

ENTER NAME

 shows in the display.

5. Use the touch tone pad on your handset or base to enter the name, then

press the OK soft key and 

ENTER TEL  NUMBR

 shows in the display.

6. Press the redial button to display the redial number.

7. Press the OK soft key again to confirm.

 If the redial number has more than an 24 digits, the redial number

cannot be stored in memory.

If a pause is needed to wait for a dial tone press the # pause button on
the number pad to insert a delay in dialing sequence of a stored
telephone number (for example, after you dial 9 for an outside line, or
wait for a computer access tone.) Each pause counts as one digit in the
dialing sequence.

1. Make sure the phone is OFF (not in TALK mode).

2. Press DIR soft key.

HANDSET  1

DIR

MENU

NAME