RCA Model 21011 Manual Do Utilizador

Signal

Meaning

A long warbling tone (with ringer on)

Signals an incoming call

Three short beeps

Page signal

One short beep (every 7 seconds)

Low battery warning

No dial tone

• Check or repeat installation steps.

• Make sure base power cord is connected to a working electrical outlet.

• Make sure the telephone line cord is connected to the base and the

modular phone jack.

• Connect another phone to the same jack; if there is still no dial tone, the

problem might be your wiring or local service.

• The cordless handset may be out of range of the base. Move closer to

the base.

• Make sure the battery is properly charged (12 hours).

• Make sure the battery pack is installed correctly.

• Did the handset beep when you pressed the talk/callback button? The

battery may need to be charged.

• Place handset in charge cradle for at least 20 seconds to reset.