Avaya 6424D+M Manual Do Utilizador

For 6408D+, 6416D+ and 6416D+M, and 6424D+ and 6424D+M
telephones connected to a DEFINITY ECS Release 6.3 or later
To program an Abbreviated Dialing button on the softkey feature menu
screens or on a feature button

Note: If you make a mistake while programming an AD button on your

display, you CANNOT move back a space to erase it. Instead,
save whatever you have entered by pressing the “#” key and
then start over.

1. Locate the Program button. It will either be a button labeled

or you will see Prog on one of the feature menu screens.

2. To access the Program feature, press the Menu button, then the Next

or Prev button, if necessary, until you see Prog on the display. Then
press the softkey below Prog. If Prog is not on one of your feature
menu screens, press the

button.

Your telephone will automatically go off-hook, and the light next to

will go on.

3. Select the feature button or the AD softkey you want to program. (To do

this, press the Menu button again, then press Next or Prev, if
necessary, until you see the AD softkey label, such as AD1, on the
display.)

You will see the message, Change number? Yes=1 No=2 on the

display.

4. If you want to enter a new number or change an existing number, press

the “1” key on the dial pad. If you do not want to change the number,
press the “2” key and skip to Step 6.

5. When you see the message Enter number: on the display, enter the

number you want that button to call. When you have finished entering
the number, press the “#” key. Go on to the next step.

Note: When you have changed the number called by a feature

button, you may want to change its label on the paper strip too.

6. When you see the message Change label? Yes=1 No=2, press the

“1” key on the dial pad to change a button label. If you do not want to
change the label, press the “2” key and skip to Step 8.

7. When you see the message Enter label on the display, use the dial

pad to enter the label you want, up to five characters. (Pressing a dial
pad key once enters the first letter on the key; if you want a different
letter or the number, press the key repeatedly until the character you
want appears on the display.) Press the “

” key to advance to the next

space. When you have finished entering the label, press the “#” key.

When you see the message Press button to program, decide if you
want to program another button. If so, go back to Step 3. If not, go on to
the next step.

Note: When you program a label, it does not appear on the display

until you hang up.

9. To exit from Programming mode, press the Speaker button.

Program

Spkr