Magnavox ZV427MG9 Manual Do Utilizador

A program set previously (PROG. A) has priority.

The first 2 minutes (at the longest) will be cut off 
(when recording to DVD only).

•  Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over 

the programs with the later start time when timer programs overlap.

•  When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
•  When 2 or more timer programs have the same start time, the program set first will be given priority.
•  A timer recording of lower priority will be canceled or start from the middle.
•  Check the overlapped timer programmings and change the priority if necessary.

•  When the recording time of 2 programs are overlapped, or 

the end time of a program and the start time of another 
program is the same, the first 2 minutes (at the longest) of 
the subsequent program will be cut off.

•  If the cut-off portion comes up to 3 minute or more, this 

program will be displayed with error number E40 in the
timer programming list.

The first 2 minutes (at the longest) will be cut off.

of the subsequent program are same:
The beginning of the PROG. B may be cut off.

•  If there is a power failure or this unit has been unplugged 

for more than 30 seconds, the clock setting and all timer
programming will be lost.

•  If a disc is not inserted, "DVD" on the front panel display

flashes and timer recording cannot be performed. In 
some cases,

will appear momentarily around the start 

time as the unit attempts to record. Please insert a
recordable disc.

•  If a cassette tape with a erase-protection tab is not in the 

cassette compartment or there is no cassette tape in the 
cassette compartment, “VCR” on the front panel display 
flashes and timer recording cannot be performed. Please
insert a recordable cassette tape.

•  If a cassette tape ends during the timer recording, the unit 

will automatically stop, eject the cassette tape, and turn
itself to the standby mode. To continue recording, insert a 
recordable tape.

•  When all the timer recordings are completed,

flashes.

Press [TIMER SET] to release the unit from the timer
standby mode.

•  If both DVD and VCR are timer programmed, you cannot 

use any functions for either unit during timer standby or 
timer recording. If you want to use functions other than 
recording under such condition, cancel timer recording
by pressing [TIMER SET] during timer standby or stop
recording by pressing [

C STOP] / [C A STOP/EJECT] on

the front panel of the unit during timer recording.

•  To cancel the timer standby mode, press [TIMER SET].
•  When the starting and the ending time are the same,

“Exceeds 12 hours” appears and the program setting will 
not be accepted.

•  When the disc or cassette tape becomes full during the

recording, the unit turns itself to the standby mode.

•  If the starting time is earlier and the ending time is later

than the current time, the recording will start right after 
you press [TIMER SET] at step 9 on page 32.

•  The timer recording cannot be performed in DVD and

VCR at the same time. If you set 2 programmings with the 
same channel and time in both devices, the program 
which is set first will have the priority.

•  “Press TIMER SET for timer recording” will appear on the

TV screen 5 minutes before the programmed starting 
time.

E9P8CUD_ZV427MG9_B_OM_v1.indd   34

E9P8CUD_ZV427MG9_B_OM_v1.indd   34

2012/03/01   13:06:21

2012/03/01   13:06:21