Lorex Technology SG17LD800 Series Guia Do Utilizador

Display Menu 

•  Motion Sensor Display - Turns the 

display of the Motion Sensor to:

z

- Active: Display motion sensor of motion 

detection area.

z

- Inactive: Display motion sensor except 

motion detection area.

z

- Off: No display of motion sensor.

• Motion Sensor Color - Sets the motion 

sensor color. When Motion is detected 
on a channel, the moving parts of the 
image will be highlighted with colored 
squares (i.e. Blue Squares).

•  Motion Transparency - Setup motion 

transparency. This sets the 
transparency of the Motion Sensor 
blocks from 0~5.

• Sequence Dwell - Sets the cycle time 

when the system is in Sequence Mode 
(between 1~60 seconds).

• Spot-Out Dwell -The length of time to 

display a camera in Spot-out mode.

•  De-Interlace Mode - Removes the 

screen spread when set to ON

• Alarm Pop-Up Mode - Set to ON/OFF. 

Switches the screen display to any 
channel when an Alarm is detected. 

• Alarm Pop-Up Dwell - Determines the 

length of time that a channel is displayed 
when an Alarm is detected (between 
1~60 seconds).

• Motion Pop-Up Mode - Set to ON/OFF. 

Switches the screen display to any 
channel when Motion is detected.

• Motion Pop-Up Dwell - Determines the 

length of time that a channel is displayed 
when Motion is detected (between 1~60 
seconds).