Memorex MLT2022 Manual Do Utilizador

After setting channels into memory, you can add or delete channels as follows: 

Make sure the main power switch is on as shown on page

14, then press the POWER button 1 to turn on the TV; the

POWER indicator will light green. Press the TV/VIDEO

button 2 repeatedly to select the TV mode. Select a

channel to delete using the Direct Channel

Selection/Number (0-9) buttons 3. 

Press the ENTER/MENU button 1; the Video Menu screen

will appear. Press the CHANNEL/Navigation UP 2 or

DOWN 3 button to select TV SETUP, then press the

ENTER/MENU button 1 to select it. 

Press the CHANNEL/Navigation UP 1 or DOWN 2 button

until ADD/ERASE is selected. Select ADD or ERASE using

the VOLUME UP/Navigation Right 3 or VOLUME

DOWN/Navigation Left 4 button. Press the FREEZE/EXIT

MENU button 5 to confirm and exit the menu. If ERASE is

selected, the channel will be skipped when using the

CHANNEL/Navigation UP 1 or DOWN 2 button.

NOTE: The adding and skipping channels function : If the channel is erased, you cannot use the Channel/Navigation UP or

Down button to select that channel. You only can use the Direct Channel Selection/ Number (0-9) buttons to select that

channel. Add the channel again so you can select that channel using the Channel/Navigation UP or Down button.