Sony KDE-37XS955 Manual Do Utilizador

Página de 127
19
Setup
4
VIDEO 6 IN 
HDMI IN/R-AUDIO-L 
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital 
audio/video interface between this TV and any HDMI-equipped audio/video component, 
such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-
definition video, plus two-channel digital audio.
5
VIDEO 1/3 IN 
VIDEO/
R-AUDIO-L (MONO)
Connect to the composite A/V output jacks on your VCR or other video component. A third 
composite A/V input jack (VIDEO 2) is located on the left side panel of the TV. These 
video connections provide better picture quality than the VHF/UHF (
8
) connections.
6
HD/DVD 4/5 IN 
(1080i/720p/480p/
480i)
Connect to your DVD player’s or digital set-top box’s component video (Y, P
B
, P
R
) and 
audio (L/R) jacks. Component video provides better picture quality than the S VIDEO (
9
), 
the VHF/UHF (
8
) or the composite video (
5
) connections.
7
CABLE
RF input that connects to your cable signal.
8
VHF/UHF
RF input that connects to your VHF/UHF antenna or cable box.
9
VIDEO 1/3 IN
S VIDEO
Connects to the S VIDEO OUT jack of your VCR or other video equipment that has 
S VIDEO. S VIDEO provides better picture quality than either composite video (
5
) or 
VHF/UHF (
8
) connections.
0
CENTER SPEAKER 
IN 180W (6
Ω
) MAX
Connect the center output terminals of Dolby Pro Logic* system decoder amplifier. You can 
use the TV speakers as a center speaker.
qa
CONTROL S 
IN/OUT
Allows the TV to receive (IN) and send (OUT) remote control signals to other Sony 
infrared-controlled audio or video equipment that has the CONTROL S function.
qs
SUBWOOFER OUT 
(VAR)
Connects to the input jack of your woofer.
qd
AUDIO OUT 
(VAR/FIX/R/L)
Connects to the left and right audio input jacks of your audio or video equipment. You can 
use these outputs to listen to your TV’s audio through your stereo system. 
*
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
Jack 
Description