Toshiba 42XV600A Manual Do Utilizador

34

This feature can be used to check the version of software 

currently installed. When in DTV mode, it includes 

additional diagnostic information such as signal strength, 

signal quality, centre frequency, modulation, etc.

  From the 

SETUP menu, press s or r until System 

Information is selected.

  Press Q to display the System Information.

This function allows you to manually set the time zone.

Please note that if you manually change the time zone

setting, all existing entries under Programme Timers will 

become invalid as they are still based on the old time 

zone. It is recommended that you delete all entries under

Programme Timers before proceeding with the steps 

described below.

  From the 

DTV Settings menu, press s

 or r to 

select 

Local Time Setting.

  Press Q, and then press s or r to select Time 

Zone.

  Press v or w to select the item you want to set.  

(

New South Wales, Northern Territory, 

Queensland, South Australia, Tasmania, 

Victoria, Western Australia, Australian Capital 

Territory)

  Press s to select 

Local Time, and then press v or 

w to set as required.

The licences for the software used in this TV are available 

for viewing on screen.

  From the 

SETUP menu, press s

 or r until 

Software Licences is selected.

  Press Q .

A screen will appear displaying all of the licencing 

information required for the TV’s software. 

  From the 

SETUP menu, press s or r to select AV 

Connection, and then press Q.

  Press s or r to select 

Digital Audio Output.

  Press v or w to select 

Auto or PCM

Auto:   This mode outputs Dolby Digital or PCM to 

the digital audio output socket providing it is 

being broadcast.

PCM:   Select this when a 2ch digital stereo amplifier is

connected to the TV. When you select a Dolby 

Digital or MPEG audio track, the sound is 

converted to the PCM (2ch) format and output.

This feature allows control of audio compression for 

digital TV programmes excluding those with MPEG-1 and 

MPEG-2 audio.

  From the 

SOUND menu, press s

 or r to select 

Dynamic Range Control.

  Press v or w to select 

On or Off.