Toshiba 29CZ6TES Manual Do Utilizador
5
VHF
UHF
Mixer
Outdoor
antenna
antenna
300-ohm twin-lead feeder with
optional antenna adapter
optional antenna adapter
75-ohm coaxial cable
or
1
Connect the antenna to
at the
rear of the TV.
Connect the power cord to an
electrical outlet with standard
household power within the range
of ~110-240V, 50/60Hz.
electrical outlet with standard
household power within the range
of ~110-240V, 50/60Hz.
Notes
• Do not connect the power cord until all
• Do not connect the power cord until all
your equipments have been connected.
• The antenna cables should not be
bundled with the power cord and the like.
Insert the batteries into the remote
control.
control.
Requires two R03
(AAA) batteries
(AAA) batteries
+
-
-
+
Operating range
Remote sensor
5m
• If the remote control does not operate
correctly, if the operating range becomes
reduced, replace both batteries with
new ones.
reduced, replace both batteries with
new ones.
• When the remote control will not used for
a long period of time or when the batteries
are worn out, remove the batteries to
prevent leakage.
are worn out, remove the batteries to
prevent leakage.
• Do not drop, dampen or disassemble the
remote control.
Cautions
• Do not dispose batteries into fire. Dispose
• Do not dispose batteries into fire. Dispose
batteries into the designated disposal areas
according to the local regulations.
according to the local regulations.
• Do not mix battery types or combine used
batteries with new ones.
2
3
4
5
6
GETTING STARTED
Push the (Power switch) until it
clicks to turn on the power.
clicks to turn on the power.
Refer to page 8 for details on power on and off.
Preset the channels automatically
(ASM function).
(ASM function).
Use remote control for this operation. The
buttons on the TV with similar name may also
be use.
buttons on the TV with similar name may also
be use.
1
Select the starting position for channel
to be preset. Press the Number buttons
(-/--, 0~9) or CH s/t.
to be preset. Press the Number buttons
(-/--, 0~9) or CH s/t.
1
2
Set the correct broadcast system for
your region. Press MENU and then ; -/+
to highlight the “
your region. Press MENU and then ; -/+
to highlight the “
SET UP” icon.
Confirm “COLOR MODE” is set to “AUTO”
and “SOUND MODE” is set to proper
system. (Refer to the table on page 9.) If
not, press CH s/t to select “COLOR
MODE” or “SOUND MODE, press ; -/+
and then CH s/t to set each proper
system.
and “SOUND MODE” is set to proper
system. (Refer to the table on page 9.) If
not, press CH s/t to select “COLOR
MODE” or “SOUND MODE, press ; -/+
and then CH s/t to set each proper
system.
3
Press MENU and then ; -/+ to highlight
the “
the “
TUNING” icon. Select “ASM”,
then press ; + to start the search. When
the TV screen returns to the start position,
the procedure is complete.
the TV screen returns to the start position,
the procedure is complete.
TUNING
MFT
AFT
ASM
SEARCH
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
MEMORY
P001
OFF
CH
CH
MENU
SELECT / ADJUST –/+ BACK
Press
; -/+
to adjust the sound
volume.
SETUP
LANGUAGE
COLOR MODE
SOUND MODE
LANGUAGE
COLOR MODE
SOUND MODE
SKIP
BLUE SCREEN
TEXT
BLUE SCREEN
TEXT
ON
FAST
AUTO
OFF
B/G
ENGLISH
MENU
SELECT / MENU –/+ BACK
EN-01-20[29CZ5DE/29CZ6DA/TES]-1
23/9/05, 9:26 AM
5