Toshiba 40S51UN Manual Do Utilizador

Chapter 6: Basic features

Using Channel Return

You can switch between two channels without
entering a channel number each time. This feature
also works for external inputs.

1無

Select the first channel you want to view.

2無

Select a second channel using the Channel Number
buttons (and the dash (

) button if needed).

3無

Each time you press

, the TV switches back

and forth between the last two channels that were
tuned.

Using SurfLock

™

The SurfLock

™

feature temporarily memorizes one

channel to the

button so it can be quickly

returned to from any other channel. This feature also
works for external inputs.

To memorize a channel to the

button:

1無

Tune the channel you want to program to the

button.

2無

Press and hold

for about 2 seconds until the

message “Memorized” appears. The channel has
been programmed to the

button.

3無

You can then change channels repeatedly, and
when you press

, the memorized channel will

be tuned.

After pressing

and then changing channels

again, the memory is cleared and the button functions
as Channel Return.

Selecting the video input to view

To select the video input to view:

1無

Press

on the remote control or TV control

panel.

2無

Change the input:
• Press 0–6 (for 24”), 0-7 (for 32” / 40”).
• Repeatedly press p or q. Press .
• Repeatedly press

HDMI CEC

(for 24”)

(for 32” / 40”)

Note:
•

You can label the video input sources according

to the specific devices you have connected to

the TV ( “Labeling video inputs” on page 31).

•

You can skip sources ( “Skipping video

inputs” on page 30).

•

Inputs that are set to be skipped will not be

available and will be skipped when selecting

inputs by repeatedly pressing

or p or q.

•

You can select inputs that are set to be skipped

using the number buttons.

•

If one or more HDMI

CEC devices are

connected to an HDMI input, the icon appears

in the input selector. In this case, the label (

page 31) will not appear on the input selector.

•

When the Auto Input feature is set, you

can select a video input source with the

remote control by pressing and holding the

corresponding MODE SELECT button for 2

seconds ( page 32).

To select a HDMI

CEC device:

1無

Press p or q to select an HDMI input.

2無

Press u. The list of HDMI

CEC devices for that

input appears.

3無

If the input has multiple HDMI

CEC devices, use

p or q to select a device.

4無

Press .