Toshiba 40S51UN Manual Do Utilizador
Chapter 6: Basic features
42
Using the HDMI
®
settings feature
Note:
If some HDMI legacy sources do not work
properly with your HDMI TV, set INSTAPORT™ to
Off
. Adjusting this setting should allow your HDMI
legacy source to operate properly with your TV.
Mode
(default setting)
Description
INSTAPORT
™
: On
Reduces the lag time when
switching HDMI sources.
switching HDMI sources.
RGB Range: Auto
Adjusts the RGB full range signal
automatically.
When
automatically.
When
Limited is selected, the
RGB output signal is output in
the range of 16 to 235. When
the range of 16 to 235. When
Full
is selected, the RGB output signal
is output in the range of 0 to 255.
is output in the range of 0 to 255.
The RGB Range setting requires appropriate HDMI
source devices. If your HDMI source device does not
support this feature, the TV may not work properly
when it is enabled.
Note:
source devices. If your HDMI source device does not
support this feature, the TV may not work properly
when it is enabled.
Note:
If your HDMI connection is capable of 1080p
and/or your TV is capable of refresh rates greater
than 60 Hz, you will need a High Speed HDMI
®
cable.
Conventional HDMI/DVI cables may not work properly
with this mode.
1無
Select the appropriate HDMI input mode (HDMI 1,
HDMI 2, HDMI 3, or HDMI 4 (except 24SL415U)).
HDMI 2, HDMI 3, or HDMI 4 (except 24SL415U)).
2無
>
Settings > PREFERENCES > AV Connection > .
3無
Press p or q to select
HDMI Settings. Press .
4無
Press p or q to select an item.
5無
Press t or u to select a setting.
Viewing the HDMI
®
signal
information
1無
>
Settings > PREFERENCES > HDMI
Information Display.
2無
Press t or u to select
On. Press
. The normal
banner and signal information banner appear.
Note:
•
The signal information banner will appear when this
feature is set to
On and you watch HDMI input.
•
If you press
when this feature is set to Off, only
the normal banner will appear.
Using your PC with the TV
Adjusting the image
If the edges of the picture are hidden, readjust
Horizontal Position and Vertical Position. If the picture
is affected by interference, readjust
is affected by interference, readjust
Clock Phase and
Sampling Clock.
1無
Select PC input mode ( “Selecting the video
input to view” on page 35).
input to view” on page 35).
2無
>
Settings > PREFERENCES > Display
Settings > .
3無
Press p or q to select
PC Settings. Press .
Note:
If a PC is not connected or there is no PC
input signal, this menu will not be available.
4無
Press p or q to select an item.
5無
Press t or u to make adjustments.
Note:
The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of
malfunction.
Mode
Description
Adjustment range
Horizontal
Position
Position
Moves the picture
left/right.
left/right.
within ±10 from
center.*
center.*
Vertical
Position
Position
Moves the picture up/
down.
down.
within ±10 from
center.*
center.*
Clock Phase
Helps to reduce noise
and sharpen the picture.
and sharpen the picture.
within ±15 from
center.
center.
Sampling
Clock
Clock
Helps to reduce
noise and minimize
periodic vertical
stripes on the screen.
noise and minimize
periodic vertical
stripes on the screen.
within ±5 from
center.
center.
* The default settings and /or adjustment ranges vary
depending on the input signal format.
To reset PC Settings:
Select
Select
Reset. Press .
Setting the PC audio
You can output sound from your PC when connecting
it to your TV, using the AUDIO IN terminal and PC
audio cable.
it to your TV, using the AUDIO IN terminal and PC
audio cable.
1無
>
Settings > PREFERENCES > AV Connection
> .
2無
Press p or q to select
PC/HDMI 3 Audio.
3無
Press t or u to select
PC.
Note:
To select PC, set
Shared PC Audio to PC.