Toshiba 40S51UN Manual Do Utilizador

Chapter 10: Appendix

Operating other devices

Your TV remote control has one dedicated TV mode
and three programmable multi-brand modes:

CABLE/

SAT, BD/DVD, and AUX.
Note:

To operate a non-Toshiba device or a Toshiba

device that the remote control is not preprogrammed

to operate, you must program the remote.

Mode select Default device mode control

(before programming)

Toshiba TV

CABLE/SAT Toshiba Satellite receiver
BD/DVD

Toshiba Blu-ray Disc

™

player

AUX

Onkyo Receiver

Mode select Device mode control

(after programming)

Toshiba TV

CABLE/SAT

Multi-brand video/audio devices

BD/DVD
AUX

Note:

If you cannot program the TV’s remote to operate

your device or some of its features, use the device’s
remote or the controls on the device.

Programming the remote to

operate other devices

Device code setup

1無

Find the code for your device brand in the remote
control device code table (



page 82–87).

If multiple codes are listed, try each one
separately until you find one that works.

2無

Press a mode select button (

CABLE/SAT, BD/DVD,

AUX).

3無

While holding down

, input the 4-digit code

for your device.

4無

Point the remote at the device. Press to test the
code.

Result

Meaning

The device responds. Valid code

The device does not
respond.

Invalid code
Repeat the procedure, using
another code

5無

When programming is complete, test all necessary
keys on the TV’s remote that operate your device.
If some keys are not operational, repeat the device
code setup using another code (if other codes are
listed for your device).

6無

To control the TV, press TV.

7無

If your VCR does not respond to the codes for
your VCR brand, and has a switch labeled VCR1/
VCR2, set the switch to the other position, then
program the remote control.

Note:

Every time you change the batteries, you must

reprogram the remote.