Toshiba 42HP82 Manual Do Utilizador

11

PROCEED

INPUT  SELECT / EXIT

DOWN

UP

LEFT / -

RIGHT / +

VOLUME

POWER/STANDBY

Approx.

23ft / 7m

Connect the supplied remote cable to the remote
controller’s remote jack and the “REMOTE CONTROL”
terminal on the display.
When the cable is connected, the mode automatically
switches to wired remote control. When the wired remote
control mode is used, the remote controller can be operated
even if no batteries are loaded.

• Use the remote controller within a distance of about 23ft /

7 m. from the front of the display’s remote control sensor
and at horizontal and vertical angles of up to approximately
30°.

• The remote control operation may not function if the

display’s remote control sensor is exposed to direct
sunlight or strong artificial light, or if there is an obstacle
between the sensor and the remote controller.

• Do not drop or mishandle the remote controller.
• Do not get the remote controller wet. If the remote

controller gets wet, wipe it dry immediately.

• Avoid heat and humidity.
• When not using the remote controller for a long period,

remove the batteries.

• Do not use new and old batteries together or use different

types together.

• Do not take apart the batteries, heat them, or throw them

into a fire.

• When using the remote controller in the wireless

condition, be sure to unplug the remote cable from the
REMOTE CONTROL terminal on the display.

RGB  3

( D i g i t a l   RGB )

VIDEO  1

VIDEO  2

REMOTE
CONTROL

CONTROL
LOCK
ON /     OFF

RGB  1

R / CR / PR

L ( MONO )

L ( MONO )

G / Y
/ VIDEO  3

B / CB / PB

HD

VD

R

R

Y

CB / PB

CR / PR

L ( MONO )

R

EXTERNAL
CONTROL

CONTROL
LOCK

ON /     OFF

R

EXTERNAL
CONTROL

REMOTE
CONTROL

Remote Control
Cable

To Remote Jack