Toshiba 42A3000A Manual Do Utilizador

Página de 28
26
Reference section
Troubleshooting
Before calling a service technician, please check the following 
table for a possible cause of the symptom and some solutions.
Symptom and solution
TV will not turn on
• Make sure the power cord is plugged in, then press !
and 1.
• The remote control batteries may be dead. Replace the 
batteries.
No picture, no sound
• Check the antenna connections.
No sound, picture OK
• The sound may be muted. Press I, i or u.
• The station may have broadcast difficulties. Try another 
channel.
Poor sound, picture OK
• The station may have broadcast difficulties. Try another 
channel.
Poor picture, sound OK
• Check the antenna connections.
• The station may have broadcast difficulties. Try another 
channel.
• Adjust the PICTURE menu.
Poor reception of broadcast channels
• Check the antenna connections.
• The station may have broadcast difficulties. Try another 
channel.
• Make sure the Color system is properly set.
Teletext problems
• Check the antenna connections. 
Good performance of text depends on a good strong 
broadcast signal.
Some pixels of the screen do not light up
• The LCD display panel is manufactured using an 
extremely high level of precision technology, however, 
sometimes some pixels of the screen may be missing 
picture elements or have luminous spots. This is not a sign 
of a malfunction.
The brightness of the screen comes down, or flickers 
of the screen are caused, or some parts of the screen 
do not light up.
• When you just buy and start to use this TV, a flickering 
may be caused in the screen. In this case, switch off the 
TV, then switch on it again to cure the condition.
• The cold cathode fluorescent lamp used for the back light 
on this TV has longevity. When the brightness of the 
screen comes down, or the flickers of the screen are 
caused, or some parts of the screen do not light up, it may 
reach the end of its life. Contact a service technician.
The picture brightness varies when you display 
switch the TV on.
• If you switch the TV on at 0°C and under, wait until the  
warms up.
Multiple images
• The station may have broadcast difficulties. Try another 
channel.
• Antenna reception may be poor. Use a high directional 
outdoor antenna.
• Check if the direction of the antenna has changed.
Poor color or no color
• The station may have broadcast difficulties. Try another 
channel.
• Adjust the Tint and/or Color in the PICTURE menu.
The remote control does not operate
• Remove all obstructions between the remote control and 
the remote control sensor on the TV.
• The remote control batteries may be dead. Replace them 
with new ones.
Broadcast system
Broadcast transmission systems of each 
country or region
Asia M.E.
Oceania
Africa
South America
Note:
PAL, SECAM and NTSC 3.58 (MHz) are different color signal 
broadcast transmission systems applicable to different 
countries or region. NTSC 4.43 (MHz) is used in special VCRs 
to playback NTSC recorded video tapes through PAL 
television equipment.
Country or region
Color
Sound
Bahrain, Kuwait, Israel, Oman, 
Qatar, United Arab Emirates, 
Yemen, etc. Indonesia, Malaysia, 
Singapore, Thailand, etc.
PAL
B/G
China
PAL
D/K
China Hong Kong
PAL
I
Iraq, Islamic Republic of Iran, 
Lebanon, Saudi Arabia, etc.
SECAM
B/G
Russian Federation, etc.
SECAM
D/K
Myanmar, etc.
NTSC
M
Country or region
Color
Sound
Australia, New Zealand, etc.
PAL
B/G
Country or region
Color
Sound
Republic of South Africa, etc.
PAL
I
Country or region
Color
Sound
Argentina, Paraguay, Uruguay, etc.
PAL
N
Brazil
PAL
M
Chile, Colombia, etc.
NTSC
M