Toshiba 40E200U1 Manual Do Utilizador
Chapter 7: Using the TV’s advanced features
52
Using CableClear
®
digital noise
reduction
The CableClear
®
digital noise reduction feature
allows you to reduce visible interference in your
TV picture. This may be useful when receiving a
broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
TV picture. This may be useful when receiving a
broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1無
Press
and open the
Picture menu, highlight
Noise Reduction and press
.
2無
In the
CableClear field, select your desired setting.
Note
:
• If the current input is ANT/CABLE, VIDEO
1
, or VIDEO 2, the menu will display the text
“CableClear.” The available selections are Off,
Low
, Middle, and High.
• If the current input is ColorStream HD, HDMI
1
, HDMI 2, HDMI 3 or HDMI 4, the menu will
display the text “DNR.” The available selections
are Off, Low, Middle, and High. Low, Middle,
and High will reduce the noise in varying
degrees, from lowest to highest, respectively.
3無
To save the new settings, highlight
Done and
press
.
To revert to the factory defaults, highlight
Reset
and press
.
Using MPEG noise reduction
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression.
Choices for MPEG noise reduction are
visible interference caused by MPEG compression.
Choices for MPEG noise reduction are
Off, Low,
Middle, and High. Off is automatically selected when
this feature is disabled (“grayed out”).
To select the MPEG noise reduction level:
1無
Press
and open the
Picture menu.
2無
Highlight
Noise Reduction and press
.
3無
Press p or q to highlight the
MPEG Noise
Reduction field, and then press t or u to select
either
Off, Low, Middle or High.
4無
To save the new settings, highlight
Done and
press
.
To revert to the factory defaults, highlight
Reset
and press
.
Using 1080p PC Mode
You can use this function to output clear word image
on the TV screen, when a PC is connected to the HDMI
terminal.
Note:
on the TV screen, when a PC is connected to the HDMI
terminal.
Note:
This function is available only for 1080p HDMI
input signal.
To turn on 1080p PC mode:
1無
Press
and open the
Picture menu.
2無
Highlight
Noise Reduction and press
.
3無
Press p or q to highlight the
1080p PC Mode
and then press t or u to select
On and press
.
To turn off 1080p PC mode:
Select
Off in step 3 above.
Using the Game Mode feature
You can use the Game Mode feature for shorter frame
delays when playing a video game requiring split-second
timing between the on-screen display and input from the
controller (such as music creation and high-action games).
This feature is more effective for 480i and 1080i input
signals.
delays when playing a video game requiring split-second
timing between the on-screen display and input from the
controller (such as music creation and high-action games).
This feature is more effective for 480i and 1080i input
signals.
Note:
To use the Game Mode feature, the current
video input must be Video 1, Video 2, ColorStream
HD
, HDMI 1, HDMI 2, HDMI 3 or HDMI 4. The Game
Mode cannot be turned on when any other video
input is selected.
To turn on Game Mode:
1無
Press
and open the
Picture m
enu, highlight
the
Game Mode.
2無
Press t or u to select
On.
To turn off Game Mode:
Select
Off in step 2 above, change the video input, or
turn the TV off and then on again.
Note:
Note:
You can change the video input by
pressing
on the remote control
( page 29).
40E200U1_EN-2nd.indb 52
2010/3/9 下午 02:00:12