Toshiba 40RV52U Manual Do Utilizador

Página de 64
12
Overview of cable types
Cables can be purchased from most stores that sell audio/
video devices. Before purchasing any cables, be sure of 
connector types required by your devices and the length of 
each cable.
Coaxial (F-type) cable
Coaxial (F-type) cable is used for connecting your antenna, 
cable TV service, and/or cable converter box to the ANT/
CABLE
 input on your TV.
Standard A/V cables (red/white/yellow)
Standard A/V cables (composite video) usually come in sets 
of three, and are for use with video devices with analog audio 
and composite video output. These cables (and the related 
inputs on your TV) are typically color-coded according to 
use: yellow for video, red for stereo right audio, and white for 
stereo left (or mono) audio.
S-video cable
S-video cable is for use with video devices with S-video 
output. Separate audio cables are required for a complete 
connection.
Note: An S-video cable provides better picture performance 
than a composite video cable. If you connect an S-video 
cable, be sure to disconnect the standard (composite) video 
cable or the picture performance will be unacceptable.
Component video cables (red/green/blue)
Component video cables come in sets of three and are for 
use with video devices with component video output. 
(ColorStream
®
 is Toshiba’s brand of component video.) These 
cables are typically color-coded red, green, and blue. Separate 
audio cables are required for a complete connection.
Note: Component video cables provide better picture 
performance than a standard (composite) video or S-video 
cable.
HDMI™ cable (with HDMI Logo “
”)
HDMI (High-Definition Multimedia Interface) cable is for 
use with devices with an HDMI output. An HDMI cable 
delivers digital audio and video in its native format. This 
cable carries both video and audio information; therefore, 
separate audio cables are not required for a complete HDMI 
device connection (
 page 17 and page 20).
Note: HDMI cable provides better picture performance than 
a standard (composite) video or S-video cable.
Optical audio cable
Optical audio cable is for connecting receivers with Dolby 
Digital or PCM (pulse-code modulation) optical audio input 
to the TV’s DIGITAL AUDIO OUT terminal (
 page 19).
Analog RGB (15-pin) computer cable
Analog RGB (15-pin) computer cable is for connecting a PC 
to the TV’s PC IN terminal (
 page 20).
About the connection illustrations
You can connect different types and brands of devices to 
your TV in several different configurations. The connection 
illustrations in this manual are representative of typical 
device connections only. The input/output terminals on your 
devices may differ from those illustrated herein. For details 
on connecting and using your specific devices, refer to each 
device’s owner’s manual.
Chapter 2: Connecting your TV