Toshiba 40RV52U Manual Do Utilizador
Chapter 6: Using the TV’s features
44
Adjusting the audio
Muting the sound
Press
on the remote control to partially reduce (1/2 MUTE)
or turn off (MUTE) the sound. Each time you press
, the
mute mode will change in the following order:
1/2 Mute
Mute
Volume
If the closed caption mode is set to Off when you select
“MUTE” mode, the closed caption feature is automatically
activated if the TV program is Closed Captioned. To mute
the audio without automatically activating the closed caption
feature, use
“MUTE” mode, the closed caption feature is automatically
activated if the TV program is Closed Captioned. To mute
the audio without automatically activating the closed caption
feature, use
to set the volume to 0. See “Using the closed
caption mode” (
page 43) for more information on closed
caption modes.
Using the digital audio selector
You can use the Digital Audio Selector to conveniently switch
between audio tracks on a digital channel (for those channels
that have multiple audio tracks). This temporarily overrides
the audio track chosen by the language option under Audio
Setup (
between audio tracks on a digital channel (for those channels
that have multiple audio tracks). This temporarily overrides
the audio track chosen by the language option under Audio
Setup (
“Selecting stereo/SAP broadcasts” on page 44).
To use the digital audio selector:
Press
and open the Audio menu.
Highlight Digital Audio Selector and press
.
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio
Audio Setup
Press
S
or
T
to select Audio, and then press
W
or
X
to
select the desired service.
Press
.
1
2
2
3
4
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by
individual stations).
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by
individual stations).
When the TV receives a stereo or SAP broadcast, the word
“STEREO” or “SAP” appears on-screen when
“STEREO” or “SAP” appears on-screen when
is pressed.
The MTS feature is only available for analog signals on the
ANT/CABLE input.
ANT/CABLE input.
To listen to stereo sound:
Press
and open the Audio menu.
Highlight Audio Setup and press
.
In the MTS field, select Stereo.
To save the new settings, highlight Done and press
.
To reset the settings to the factory defaults, highlight
Reset and press
Reset and press
.
Note:
You can typically leave the TV in Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
it will automatically output the type of sound being
broadcast (stereo or monaural).
If the stereo sound is noisy, select Mono to reduce the
noise.
noise.
To listen to an alternate language on an ATSC digital
station (if available):
station (if available):
Highlight the Language field in step 3 above, and then press
W
or
X
to select the language you prefer.
To listen to a second audio program on an analog
station (if available):
station (if available):
Select SAP in step 3 above.
Note:
A second audio program (SAP) can be heard only on
those TV stations that offer it. For example, a station might
broadcast another language as a second audio program.
If you have SAP on, you will see the current program on the
screen but hear the other language instead of the program’s
normal audio.
those TV stations that offer it. For example, a station might
broadcast another language as a second audio program.
If you have SAP on, you will see the current program on the
screen but hear the other language instead of the program’s
normal audio.
If you have SAP on and the station you are watching is
not broadcasting a second audio program, the station’s
normal audio will be output. However, occasionally there is
no sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
not broadcasting a second audio program, the station’s
normal audio will be output. However, occasionally there is
no sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.
1
2
3
4
2
3
4
•
•
•
•