Toshiba 40RV52U Manual Do Utilizador
Chapter 8: Troubleshooting
56
Channel tuning problems
Make sure the remote control is set to the correct device
mode (
mode (
page 22).
The channel may have been erased from the channel
memory by the Channel Add/Delete feature. Add the
channel to the channel memory (
memory by the Channel Add/Delete feature. Add the
channel to the channel memory (
page 31).
The channel may be blocked by the Channels Block
feature. Unblock the channel (
feature. Unblock the channel (
page 48).
If you are unable to tune digital channels, check the
antenna configuration (
antenna configuration (
page 30). If you are still
unable to tune digital channels, clear all channels from
the channel list (
the channel list (
page 32) and reprogram channels
into the channel memory (
page 31). If you are still
unable to tune digital channels, use the Reset Factory
Defaults procedure (
Defaults procedure (
page 34). Also see “TV stops
responding to controls” and “Other problems”
(
(
page 55).
Closed caption problems
If the program or video you selected is not closed-
captioned, no captions will display (
captioned, no captions will display (
page 43).
If text is not available, a black rectangle may appear. If
this happens, turn off the closed caption feature
(
this happens, turn off the closed caption feature
(
page 43).
A closed-caption signal may not display correctly in
the following situations: a) when a videotape has been
dubbed; b) when the signal reception is weak; or c) when
the signal reception is nonstandard (
the following situations: a) when a videotape has been
dubbed; b) when the signal reception is weak; or c) when
the signal reception is nonstandard (
page 43).
Rating blocking (V-Chip) problems
If you forget your PIN code: While the PIN code
entering screen is displayed, press
entering screen is displayed, press
four times
within 5 seconds. The PIN code you previously stored
will be cleared (
will be cleared (
page 46).
No HDMI Control operation
The HDMI Control feature is available for Toshiba
HDMI Control compatible devices.
Make sure the HDMI cables with the HDMI Logo
(
HDMI Control compatible devices.
Make sure the HDMI cables with the HDMI Logo
(
) are used.
When the connected HDMI Control device does not
work correctly after you have changed settings of the
device, turn off your TV and unplug the power cord,
then plug and turn on again.
If several devices are connected, HDMI Control feature
may not operate properly.
Read the instruction manual furnished with the
connected HDMI Control device.
work correctly after you have changed settings of the
device, turn off your TV and unplug the power cord,
then plug and turn on again.
If several devices are connected, HDMI Control feature
may not operate properly.
Read the instruction manual furnished with the
connected HDMI Control device.
HDMI problems
For HDMI cables
Make sure to use cables with the HDMI Logo
(
(
) (
page 17).
For Legacy HDMI source
Some legacy HDMI sources may not work properly
with the latest HDMI TV products, due to new standard
adoption.
with the latest HDMI TV products, due to new standard
adoption.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•