Toshiba 42LZ196 Manual Do Utilizador
55
LZ196 (E/F) Web 213:276
Chapter 6: Using the TV’s advanced features
Selecting the color temperature
You can change the quality of the picture by selecting from
three preset color temperatures (cool, medium, and warm), as
described below.
three preset color temperatures (cool, medium, and warm), as
described below.
To select the color temperature:
1
Press Y and open the Video menu.
2
Highlight Picture Settings and press T.
3
Highlight Advanced Picture Settings and press T.
4
Highlight Color Temperature and press T.
5
In the Color Temperature field, select the mode you
prefer (Cool, Medium, or Warm).
prefer (Cool, Medium, or Warm).
6
Press B or b to select either B Drive or G Drive, and
then press C or c to adjust the settings.
then press C or c to adjust the settings.
•
B Drive: c makes the picture blueish.
•
G Drive: c makes the picture greenish.
Note: The B Drive and G Drive settings are connected to
the Color Temperature settings and will change based
on which is selected in step 5 above.
the Color Temperature settings and will change based
on which is selected in step 5 above.
7
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference.
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference.
Using the Vertical Edge Enhancer feature
The Vertical Edge Enhancer feature strengthens video contour.
To turn on the Vertical Edge Enhancer feature:
1
Press Y and open the Video menu.
2
Highlight Picture Settings and press T.
3
Highlight Advanced Picture Settings and press T.
4
In the Vertical Edge Enhancer field, select the mode
you prefer (Off, Low, Middle, or High).
you prefer (Off, Low, Middle, or High).
5
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
Note:
• Changing the setting of this item will cause the Mode to
• Changing the setting of this item will cause the Mode to
automatically change to Preference.
• When the input is changed to PC, this future is automatically
set to High and grayed out in the menu.
Mode
Picture Quality
Cool
blueish
Medium
neutral
Warm
reddish
Done
Advanced Picture Settings
Mode: Preference
Static Gamma
Reset
Dynamic Contrast
High
Cool
Color Temperature
High
Vertical Edge Enhancer
0
Done
Color Temperature
Mode: Preference
B Drive
Reset
Color Temperature
Cool
G Drive
0
0
B Drive
1
G Drive
1
Done
Advanced Picture Settings
Mode: Preference
Static Gamma
Reset
Dynamic Contrast
High
Cool
Color Temperature
High
Vertical Edge Enhancer
0
LZ196_EN.book Page 55 Tuesday, August 1, 2006 6:04 PM