Toshiba 42HP95 Manual Do Utilizador
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
107
(E) 42/50HP95 *web 213:276
Video/Audio Terminals (continued)
HDMI
™
INPUT:
HDMI compliant (type A connector)
HDCP compliant
E-EDID** compliant
Suggested formats: 1080i, 480p, 480i, 720p
HDMI Audio: 2-channel PCM; 32/44.1/48 kHz sampling
HDCP compliant
E-EDID** compliant
Suggested formats: 1080i, 480p, 480i, 720p
HDMI Audio: 2-channel PCM; 32/44.1/48 kHz sampling
frequency; 16/20/24 bits per sample
PC INPUT:
15-pin D-sub Analog RGB
PC AUDIO INPUT:
3.5 mm stereo mini jack
VIDEO/AUDIO OUTPUT (also for recording):
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent,
AUDIO: 150 mV(rms) (30% modulation equivalent,
2.2 k ohm or less)
VARIABLE AUDIO OUTPUT:
0–300 mV(rms) (30% modulation equivalent,
2.2 k ohm or less)
2.2 k ohm or less)
G-LINK
™
and IR OUTPUT:
3 V(p-p), 3.5 mm mono socket (IR blaster cables supplied)
IEEE1394 INPUT/OUTPUT:
IEEE1394 compliant 4-pin
DIGITAL AUDIO OUTPUT:
Optical type
Headphone jack:
3.5 mm stereo
Dimensions
42HP95: Width: 43-3/8 inches (1100 mm)
Height: 30-3/4 inches (778 mm)
Depth: 15-3/8 inches (390 mm)
Depth: 15-3/8 inches (390 mm)
50HP95: Width: 49-5/8 inches (1258 mm)
Height: 34-5/8 inches (877 mm)
Depth: 15-3/8 inches (390 mm)
Depth: 15-3/8 inches (390 mm)
Weight
42HP95: 117.3 lbs (53.0 kg)
50HP95: 142.6 lbs (64.7 kg)
50HP95: 142.6 lbs (64.7 kg)
Supplied Accessories
• Two dual-wand IR blaster cables
• Remote control with two size “AA” alkaline batteries
• Power cord (three wire grounding type)
• Noise filter:
• Remote control with two size “AA” alkaline batteries
• Power cord (three wire grounding type)
• Noise filter:
ZCAT2436-1330A-M (see page 14)
ZCAT3035-1330 (see page 14)
ZCAT3035-1330 (see page 14)
• Clip (see item 19 on page 3)
• Owner’s Manual (this book)
• Owner’s Manual (this book)
_________
** E-EDID = Enhanced-Extended Display Identification
Specifications
NOTE: • This model complies with the specifications listed below.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
Television System
NTSC standard
ATSC standard (8VSB)
Digital Cable (64 QAM, 256 QAM; in-the-clear, unencrypted*)
ATSC standard (8VSB)
Digital Cable (64 QAM, 256 QAM; in-the-clear, unencrypted*)
*Encrypted channels can be viewed on this TV
using a CableCARD.™ See page 13 for details.
using a CableCARD.™ See page 13 for details.
Channel Coverage
VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through I)
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 135)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 135)
Power Source
120 V AC, 60 Hz
Power Consumption
42HP95: 337 W (average)
57 W in standby mode (Using a CableCARD
™
)
53 W in standby mode (Without a CableCARD
™
)
50HP95: 407 W (average)
57 W in standby mode (Using a CableCARD
™
)
53 W in standby mode (Without a CableCARD
™
)
Audio Power
10 W + 10 W
Speaker Type
Main: Four 2-3/8
×
4-3/4 inches (60
×
120 mm)
Tweeter: Two 1-1/4 inches (32 mm) round
Video/Audio Terminals
S-VIDEO INPUT:
Y : 1 V(p-p), 75 ohm, negative sync.
C : 0.286 V(p-p) (burst signal), 75 ohm
C : 0.286 V(p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent,
AUDIO: 150 mV(rms) (30% modulation equivalent,
22 k ohm or greater)
ColorStream
®
(component video) HD INPUT:
Y : 1V(p-p), 75 ohm
PR: 0.7 V(p-p), 75 ohm
PB: 0.7 V(p-p), 75 ohm
AUDIO: 150 mV(rms), 22 k ohm or greater
Suggested formats: 1080i, 480p, 480i, 720p
PR: 0.7 V(p-p), 75 ohm
PB: 0.7 V(p-p), 75 ohm
AUDIO: 150 mV(rms), 22 k ohm or greater
Suggested formats: 1080i, 480p, 480i, 720p
Appendix
11
#01E_107-111_4250HP95
05.9.12, 10:11 PM
107
Black