Toshiba 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U Manual Do Utilizador

189

Confirm that the contents of either the media server or the USB 
storage device are in formats that are supported by this TV, see 

Depending on the media server, access may be limited by the MAC 
address. Set the server according to the media server’s instruction 
manual. This TV’s MAC Address can be confirmed in the Network 
Setup portion of the User Menu, see 

Depending on the media server, it may take time to display the list.

Depending the state of this TV, Media Controller may not be able to 
control a Media Renderer playback.

If Media Renderer playback starts regardless of the user's intention, 
check the access control of Media Renderer or set Media Renderer 
to Off.

If you use a wireless access point without encryption, there is the 
risk that your Media Renderer device could be controlled by an 
unknown Media Controller. You can protect your Media Renderer 
device by going to NETWORK> Network Device Setup> Media 
Renderer Setup> Media Controller Setup and limit the 
authorized Media Controller devices, see 

.

The Power light on the front of the TV indicates the TV’s status, as 
described below.

Green:

❖

The TV is On and operating properly.

No light:

❖

The power is Off or in Standby.

Green flashing:

❖

The system is booting. The screen appears after a short wait.

❖

The fan has stopped. Turn off the TV and unplug the power 
cord. After approximately one minute, plug the power cord in 
again and turn on the TV.

Red flashing: