Toshiba 42L6200U 47L6200U 55L6200U 47L7200U 55L7200U Manual Do Utilizador

57

If Audio is selected as the device type, the volume option is active. 
However if another device (other than Audio) is selected, then this 
option is not available and grayed out.

After setting up all the options for the device, it is important to 
test the IR Blaster’s control of the device by using the Test 
option. 

Once you have selected all the appropriate information on the 
screen, use the ( /  arrow) buttons to select the Done button. 
To cancel this screen and return to the previous screen, select 
the Cancel button.

To test the IR Blaster’s control of the device:

Use the ( /  arrow) buttons to select the Test option from the 
IR Blaster Setup screen.

The TV will then send the power on and power off command to 
the device through the IR Blaster with approximately a 5 
second interval.

A message screen will appear asking you “Was your device 
powered on and off by the IR Blaster? If not, please check your 
device and IR blaster position.” If the test failed, a “Test 
Failed” message will appear on the screen.

To setup the timing control for your device:

Use the ( /  arrow) buttons to select Timing Control. A 
screen will appear allowing you to set up the Interval Time for 
the device.

Use the ( /  arrow) buttons to select from the following 
options:

❖

0.125 sec

❖

0.25 sec (this is the default)

❖

0.375 sec

❖

0.5 sec

❖

0.625

❖

0.75

❖

0.875

❖

1 sec