Toshiba 40UL605U Manual Do Utilizador

Selecting the optical audio output 

format

You can use this feature to select the optical audio 
output format when you connect a Dolby Digital 
decoder or other digital audio system to the 

Audio Out terminal on the TV (see “Connecting a 

digital audio system” on page 20).

Press 

 and open the 

Sound menu.

Highlight 

Audio Setup and press  .

In the 

Optical Output Format field, select either 

Dolby Digital or PCM, depending on your device.

To save the new settings, highlight 

Done and press  

. To revert to the factory defaults, highlight 

Reset and press  .

Using the Dolby

®

 Digital Dynamic 

Range Control feature

This dynamic range control feature causes the ATSC 
dynamic range to be further compressed, allowing 
you to switch from ATSC to analog broadcasts at the 
same dynamic range.

Press 

 and open the 

Sound menu.

Highlight 

Audio Setup and press  .

In the 

Dolby Digital Dynamic Range Control field, 

select 

Compressed. When Standard is selected, 

the audio is output with minimal compression.

To save the new settings, highlight 

Done and 

press  . 
To revert to the factory defaults, highlight 

Reset 

and press  .

• This item will be grayed out for NTSC signals, 

• The Dolby Digital Dynamic Range Control will 

Using the Locks menu

The Locks menu includes the Enable Rating 
Blocking, Edit Rating Limits, Input Lock, Front 
(Control) Panel Lock, GameTimer, and New PIN 
Code features. You can use these features after 
entering the correct PIN code.

Entering the PIN code

Press 

 and highlight the 

Locks menu icon.

Press q, which displays the PIN code entry screen.

•

The 

Lock System screen (below) appears if a 

PIN code has not been stored. Press the Channel 
Number buttons to enter a new four-digit code, 
enter the code a second time to confirm, and 
press  .

•

The 

Locks/Active screen appears if the PIN code 

is already stored. Use the Number buttons to 
enter your four-digit code and press  .

If the wrong PIN code is entered, the message “Incorrect 
PIN code, please try again!” appears. Highlight 

Retry 

and press  . Enter the code again and press  .
When the correct PIN code is entered, the 

Locks menu 

opens.

If you cannot remember your PIN code

While the PIN code entering screen is displayed, press 

 four times within five seconds. The PIN code will be 

cleared and you can enter a new PIN code.

Changing your PIN code

Press 

 and highlight the 

Locks menu icon.

Press q to display the PIN code entering screen.

Enter your four-digit PIN code and press  .

Press q to highlight 

New PIN Code and press  .

Press the Number buttons to enter a new four-
digit code. Reenter the PIN code to confirm it.

Press  . The new PIN code is now active.