Toshiba 40UL605U Manual Do Utilizador

Sound problems

 

•

Check the antenna/cable connections ( Chapter 
2).

 

•

The station may have broadcast difficulties. Try 
another channel.

 

•

The sound may be muted. Press 

VOLUME.

 

•

If you hear no sound, try setting the 

MTS feature 

to 

Stereo mode ( page 48).

 

•

If you are not receiving a second audio program 
from a known SAP source, make sure the 

MTS 

feature is set to 

SAP mode ( page 48).

 

•

If you hear audio that seems “incorrect” for the 
program you are watching (such as music or a 
foreign language), the SAP mode may be on. Set 
the 

MTS feature to Stereo mode ( page 48).

Remote control problems

 

•

Make sure the remote control is set to the correct 
device mode ( page 26).

 

•

Remove all obstructions between the remote 
control and the TV.

 

•

The remote control batteries may be dead. 
Replace the batteries ( page 24).

 

•

Your TV remote control may not operate 
certain features on your external device. Refer 
to the owner’s manual for your other device 
to determine its available features. If your TV 
remote control does not operate a specific feature 
on another device, use the remote control that 
came with the device ( pages 26–30).

 

•

If the TV still does not act as expected, use the 
Reset Factory Defaults procedure ( page 37).

Channel tuning problems

 

•

Make sure the remote control is set to the correct 
device mode ( page 25).

 

•

The channel may have been erased from the 
channel  memory by the 

automatically feature. Add the channel to the 

channel memory ( page 34).

 

•

The channel may be blocked by the 

LOCK 

feature. Unblock the channel ( page 50).

 

•

If you are unable to tune digital channels, check 
the antenna configuration ( page 34). If you 
are still unable to tune digital channels, clear all 
channels from the channel list and reprogram 
channels into the channel memory ( page 34). 
If you are still unable to tune digital channels, 
use the Reset Factory Defaults procedure ( 
page 37). Also see “TV stops responding to 
controls” and “Other problems” ( page 72).

Closed caption problems

 

•

If the program or video you selected is not 
closed-captioned, no captions will display ( 
page 46).

 

•

If text is not available, a black rectangle may 
appear. If this happens, turn off the closed 
caption feature ( page 46).

 

•

A closed-caption signal may not display 
correctly in the following situations: a) when 
a videotape has been dubbed; b) when the 
signal reception is weak; or c) when the signal 
reception is nonstandard ( page 46).

Rating blocking (V-Chip) problems

 

•

If you forget your PIN code: While the PIN code 
entering screen is displayed, press   four times 

within 5 seconds. The PIN code you previously 
stored will be cleared ( page 49).

No REGZA-LINK operation

 

•

The REGZA-LINK feature is available for 
Toshiba REGZA-LINK compatible devices.

 

•

Make sure the HDMI cables with the HDMI 
Logo (

) are used.

 

•

When the connected REGZA-LINK device 
does not work correctly after you have changed 
settings of the device, turn off your TV and 
unplug the power cord, then plug and turn on 
again.

 

•

If several devices are connected, REGZA-LINK 
feature may not operate properly.

 

•

Read the instruction manual furnished with the 
connected REGZA-LINK device.

HDMI problems

 

•

Make sure to use cables with the HDMI Logo  
(

) ( page 15).

Network problems

 

•

Check the modem and splitter connections ( 
pages 22–23).

 

•

Check the Dual Band WLAN Adapter connections 
( page 23).

 

•

Make sure the splitter is connected to the modem 
or LAN port correctly ( pages 22-23).

 

•

Confirm your modem’s operation.

 

•

Make sure your network address is set up correctly.