Toshiba 84L9300U Manual Do Utilizador

184 

Check that the router/AP (Access point) power is On.
After starting wireless network setup, confirm that the network is 

configured properly by performing the network connection test, see 

Check the router/AP’s connection status.
If the router/AP does not support PBC or WPS, Easy Setup (PBC) will 

If the available router/AP list is not displayed in Easy Setup (PBC) or 

Assisted Setup, the power of the router/AP may be Off. Check that it is 

.

Refer to the router/AP’s instruction manual.

Ensure that the devices (TV and Server) are connected correctly.
Incorrect functionality may occur when using a USB HUB connection.
Photo files that were processed and edited using the computer’s 

application software may not be viewable.
When viewing content that supports two or more formats the TV may 

select one format automatically.
Copyright protected content stored on the media server may not be 

playable on the TV.
Content playback stability may be affected by heavy network traffic.
Content originally recorded on a computer may not play correctly.
Set the media sharing of the media server to the correct settings, 

according to the media server instruction manual.
Confirm that the contents of either the media server, the USB storage 

device, or the SD card are in formats that are supported by this TV, see 

.

Depending on the media server, access may be limited by the MAC 

address. Set the server according to the media server’s instruction manual. 

This TV’s MAC Address can be confirmed in the Network Setup portion