Toshiba 84L9300U Manual Do Utilizador

98 

When Enable HDMI CEC Control and all items in the HDMI

™

 CEC 

Control Setup menu are set to On, the following functions will be 

enabled:

TV Auto Power

If an HDMI

™

 CEC device is turned on, the TV turns on automatically.

Auto Standby

If the TV is turned off, it will send a message to turn off all of the 

HDMI

™

 CEC devices connected to the TV.

Amplifier Control

If Amplifier Control is set to On, you can adjust the sound volume or 

turn off the sound using the remote control.

Initial Speaker  

Setting

With this item, you can set your audio output preference to the TV 

Speakers or the Amplifier. When this item is set to Amplifier, the remote 

control can be used to adjust or mute the volume of the audio. This 

item will not be available and set to TV Speakers automatically unless 

an HDMI

™

 CEC compatible audio system is connected.

 

 

When you turn on the audio system, change its input source, or adjust the 

sound volume, the sound will be output from the audio system’s speakers 

even if TV Speakers has been selected. Turn the TV off and on again to 

output the sound from the TV speakers.

Press the SETUP button.

Select Options > HDMI Information Display and press the OK 

button.

Press the p/q (arrow) buttons to select On.

Press the INFO button.

HDMI

™

 Information is shown (Resolution, Scan Type, Frame 

Rate, Aspect, Bit Depth, Color Space, RGB/YUV, Chroma 

Format), and the normal banner and signal information banner 

appear.

 

 

❖

  The signal information banner will appear when this feature is set to 

On and you watch an HDMI

™

 input and press the INFO button. The 

signal information will disappear after 60 seconds.

 

❖

If you press the INFO button when this feature is set to Off, only the 

normal banner will appear.