Toshiba 40XF550U Manual Do Utilizador
62
XF550U (E/F) Web 213:276
Chapter 7: Using the TV’s advanced features
Selecting the cinema mode
(480i and 1080i signals)
(480i and 1080i signals)
When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the Video 1, Video 2, ColorStream
HD1, ColorStream HD2 (component video), or HDMI
inputs on the TV, smoother motion can be obtained by setting
the Cinema Mode to Film.
player connected to the Video 1, Video 2, ColorStream
HD1, ColorStream HD2 (component video), or HDMI
inputs on the TV, smoother motion can be obtained by setting
the Cinema Mode to Film.
To set the Cinema Mode to Film:
1
From the Video menu, highlight Picture Settings and
press T.
press T.
2
Highlight Advanced Picture Settings and press T.
3
In the Cinema Mode field, select Film.
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
To set the Cinema Mode to Video:
Select Video in step 3 above.
Using the ClearFrame
™
feature
The new ClearFrame 120 Hz anti-blur technology doubles the
frame rate from 60 frames per second to 120 frames per
second, virtually eliminating motion blur without adding
flicker or reducing image brightness.
frame rate from 60 frames per second to 120 frames per
second, virtually eliminating motion blur without adding
flicker or reducing image brightness.
To turn on the ClearFrame:
1
From the Video menu, highlight Picture Settings and
press T.
press T.
2
Highlight Advanced Picture Settings and press T.
3
In the ClearFrame field, select On.
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
Note:
• If you select one of the factory-set picture modes (Sports,
• If you select one of the factory-set picture modes (Sports,
Standard, Movie or PC) and then change the ClearFrame
setting, the picture mode automatically changes to
Preference.
setting, the picture mode automatically changes to
Preference.
• When ClearFrame is set to Off, the Film Stabilization feature
will not be available (grayed out and set to Off).
Using the Film Stabilization feature
This feature helps to eliminate video shaking that can occur
when Cinema Mode is set to Film (3:2 pull down process
enabled).
when Cinema Mode is set to Film (3:2 pull down process
enabled).
To turn on Film Stabilization:
1
From the Video menu, highlight Picture Settings and
press T.
press T.
2
Highlight Advanced Picture Settings and press T.
3
In the Film Stabilization field, select Smooth.
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
Note:
• If you select one of the factory-set picture modes (Sports,
• If you select one of the factory-set picture modes (Sports,
Standard, Movie or PC) and then change the Film
Stabilization setting, the picture mode automatically
changes to Preference.
Stabilization setting, the picture mode automatically
changes to Preference.
• When Cinema Mode is set to Video or ClearFrame is set to
Off, Film Stabilization will be grayed out and set to off
automatically.
automatically.
Using CableClear
®
digital noise reduction
The CableClear
®
digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To change the CableClear settings:
1
From the Video menu, highlight Noise Reduction and
press T.
press T.
2
In the CableClear field, select your desired setting.
Note:
• If the current input is ANT/CABLE, Video 1, or Video 2,
the menu will display the text “CableClear.” The
available selections are Off, Auto, Low, Middle, and
High.
available selections are Off, Auto, Low, Middle, and
High.
• If the current input is ColorStream HD1, ColorStream
HD2, HDMI 1, HDMI 2 or HDMI 3, the menu will display
the text “DNR.” The available selections are Off, Auto,
Low, Middle, and High. Auto will react proportionally
to the strength of the noise. Low, Middle, and High will
reduce the noise in varying degrees, from lowest to
highest, respectively.
the text “DNR.” The available selections are Off, Auto,
Low, Middle, and High. Auto will react proportionally
to the strength of the noise. Low, Middle, and High will
reduce the noise in varying degrees, from lowest to
highest, respectively.
3
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
40XF550U_EN.book Page 62 Monday, March 17, 2008 2:07 PM