Toshiba 47HL167 Manual Do Utilizador
27
HL167 (E/F) Web 213:276
Chapter 3: Using the remote control
Using the remote control to operate
your other devices
your other devices
Your TV remote control has one dedicated TV mode and three
programmable multi-brand modes: CABLE/SAT, DVD, and
VCR/PVR. The default device modes and programmable
device modes are listed below.
programmable multi-brand modes: CABLE/SAT, DVD, and
VCR/PVR. The default device modes and programmable
device modes are listed below.
Note: The TV remote control is preprogrammed to operate
most Toshiba devices. To operate a non-Toshiba device or a
Toshiba device that the remote control is not preprogrammed
to operate, you will need to program the remote control. See
“Programming the remote control to operate your other
devices” (at right).
most Toshiba devices. To operate a non-Toshiba device or a
Toshiba device that the remote control is not preprogrammed
to operate, you will need to program the remote control. See
“Programming the remote control to operate your other
devices” (at right).
Note: Although your new TV’s remote control includes codes
for many devices, it may not include codes for some or all of
the features on certain devices you wish to control. If you are
unable to program the TV’s remote control to operate your
device or some of the features on that device, use the device’s
remote control or the controls on the device.
for many devices, it may not include codes for some or all of
the features on certain devices you wish to control. If you are
unable to program the TV’s remote control to operate your
device or some of the features on that device, use the device’s
remote control or the controls on the device.
Programming the remote control to
operate your other devices
operate your other devices
Device code setup
1
Find the code for your device brand in the remote control
device code table on pages 29–35.
If more than one code is listed, try each one separately
until you find one that works.
device code table on pages 29–35.
If more than one code is listed, try each one separately
until you find one that works.
2
Press the applicable mode select button (CABLE/SAT,
DVD, or VCR/PVR), until the mode select button blinks
3 times.
DVD, or VCR/PVR), until the mode select button blinks
3 times.
3
While holding down E, press the five-digit device code
for your device.
for your device.
•
If a valid code is entered, the mode select button will
blink twice.
blink twice.
•
If an invalid code is entered, the mode select button will
blink one long blink.
blink one long blink.
4
Point the remote control at the device and press p to test
the code.
the code.
•
If the device responds to the remote control, you have
entered the correct code.
entered the correct code.
•
If the device does not respond to the remote control,
repeat steps 3 and 4 using another code.
repeat steps 3 and 4 using another code.
Note: After programming the remote control, make sure
all necessary keys on the TV remote control (in addition to
all necessary keys on the TV remote control (in addition to
p) operate your device. If some keys are not
operational, repeat the device code setup using another
code (if other codes are listed for your device). If, after
trying all listed codes, the necessary keys do not operate
your device, use the device’s original remote control.
operational, repeat the device code setup using another
code (if other codes are listed for your device). If, after
trying all listed codes, the necessary keys do not operate
your device, use the device’s original remote control.
5
To control the TV, press the “TV” mode select button.
Note:
• Although the TV remote control includes codes for many
• Although the TV remote control includes codes for many
devices, it may not include codes for some or all of the
features on certain devices you want to control. If you are
unable to program the TV remote control to operate your
device or some of the features on that device, use the
device’s original remote control (or the control buttons on
the device).
features on certain devices you want to control. If you are
unable to program the TV remote control to operate your
device or some of the features on that device, use the
device’s original remote control (or the control buttons on
the device).
• Every time you change the batteries you will need to
reprogram the remote control.
• Some newer VCRs respond to either of two codes. These
VCRs have a switch labeled “VCR1/VCR2.” If your VCR has
this kind of switch and does not respond to the codes for
your VCR brand, set the switch to the other position (“VCR1”
or “VCR2”) and reprogram the remote control.
this kind of switch and does not respond to the codes for
your VCR brand, set the switch to the other position (“VCR1”
or “VCR2”) and reprogram the remote control.
MODE SELECT
Default device mode control (before
programming)
programming)
TV
Toshiba TV
CABLE/SAT
Toshiba Satellite receiver
DVD
Orion DVD
VCR/PVR
Toshiba VCR
MODE SELECT Device mode control after programming
TV
Toshiba TV
CABLE/SAT
Multi-brand video/audio devices
DVD
VCR/PVR
(continued)
42HL167_EN.book Page 27 Thursday, May 17, 2007 5:09 PM