Toshiba 42WP56A Manual Do Utilizador
20
Basic oper
ation
Picture quality adjustment
Basic operation
Picture quality adjustment
To select the picture mode:
You can select the picture quality instantly among three preset
modes and one user-set mode.
modes and one user-set mode.
• Press the
button to select
the desired picture quality.
Dynamic, Standard, Mild and
Memory (user-set) can be selected
cyclically.
Memory (user-set) can be selected
cyclically.
Note:
In the PC input mode (see page 29), this mode is not available.
In the PC input mode (see page 29), this mode is not available.
To adjust the basic picture quality:
Press the MENU button, then
press the or button to
display the PICTURE menu.
press the or button to
display the PICTURE menu.
Press the or button to
select the Picture settings
menu, then press the OK
button.
select the Picture settings
menu, then press the OK
button.
Press the or button to
select Contrast, Brightness,
Color, Tint or Sharpness, then
press the or button to
adjust the level.
select Contrast, Brightness,
Color, Tint or Sharpness, then
press the or button to
adjust the level.
Notes:
• In the PC input mode (see page 29),
• In the PC input mode (see page 29),
Color, Tint and Sharpness modes are
not available.
not available.
• The Tint may only be adjusted on a tape
which has been recorded and played
back on an NTSC VCR.
back on an NTSC VCR.
DVD
MENU
P
P
2
1
3
5
4
6
8
7
9
VCR
TV
DVD
0
OK
CALL
MENU
EXIT
Dynamic
Contrast
100
Sharpness
Tint
MENU
Back
Watch TV
EXIT
0
0
On
Black stretch
Contrast
100
Picture settings
1/2
Color
50
Brightness
50
Mode
Picture quality
Dynamic
bright and dynamic picture
Standard
standard picture
Mild
soft picture
Memory
the picture quality you set
About ISM (Image Sticking Minimization) function
The ISM function (The Image Sticking Minimization function)
automatically starts to decrease the brightness with small steps when
fixed pattern displays for long time. The pace of the decrease and the
delay time depend on the brightness in the displayed screen.
The ISM function is set to ON by default. You cannot change this
setting.
automatically starts to decrease the brightness with small steps when
fixed pattern displays for long time. The pace of the decrease and the
delay time depend on the brightness in the displayed screen.
The ISM function is set to ON by default. You cannot change this
setting.
Selection
Pressing
Contrast
lower
higher
Brightness
darker
lighter
Color
paler
deeper
Tint
reddish
greenish
Sharpness
softer
sharper