Toshiba TLP-X11Y Manual Do Utilizador

Notes

• The projector cannot be connected to a computer without an analog RGB connector. For details, refer to the computer manual.
• When connecting to a Macintosh computer, use the supplied Mac adapter (Multiple Scan 21 compatible). For some models the adapter is not required.
• You may not be able to connect some computers to the projector. For details, consult the dealer.
• Some computers may have output modes which are not compatible with this projector. Check the compatibility of the connectors, signal levels, timing,

resolutions, etc.

You can project the picture from the computer.
Check that the power for the projector and computer is off before connecting the cables.

COMPUTER IN 1 Connector
For use as both analog RGB1 input and Y/P

B

/P

R

 input. At shipping from 

factory, it is set for use as analog RGB1 input.

AUDIO IN jack
For use as both audio signals for RGB input (analog RGB1/analog 
RGB2/digital RGB) and Y/P

B

/P

R

 input.

ø3.5mm Stereo mini-jack
To audio output port

RGB cable (supplied)

To AUDIO IN jack

Computer

To COMPUTER IN 1 connector
Be sure to connect in the proper 
direction.

To monitor port (      )

Audio cable (supplied)

Connecting a Mac adapter for 
Macintosh computers (supplied)