Toshiba TLP-X11Y Manual Do Utilizador

Notes

• This function is available with Windows98 and Mac OS9 computers equipped with a USB port as standard.
• When connecting the computer’s USB port for the first time, a message asking you to insert the Windows98 CD-ROM may appear on the computer’s

monitor screen, depending on whether or not the device driver is installed. If so, do as the message says.

• When using a USB cable other than the supplied one, be sure to use a shielded type.

You can control a computer by the remote control when the projector and computer are connected with the supplied USB cable. In this manual,
this function is explained as “mouse remote control”.

Pointer control

Remote control

To USB connector
Be sure to connect in the proper 
direction.

USB cable (supplied)

To USB port

Computer

Point the remote control at the remote control
sensor on the projector when operating with its
buttons.
• To move the pointer

Press the outer side of the pointer control button
in the direction in which you want to move the
pointer. (The speed at which the pointer moves
depends on how strongly the button is pressed.)

• To click

Press L-CLICK or the center of the pointer
control.

• To right-click

Press R-CLICK.

• To drag and drop

While holding down the center of the pointer
control, press the rim side to move the pointer to
the desired spot, then release the center part.