Toshiba TLP-X10Y Manual Do Utilizador

Adjustments

Buttons

Items

(-)

(+)

Contrast

Lower

Higher

Brightness

Darker

Brighter

Color

Thinner

Deeper

Phase

Adjust flickers

Adjust flickers

Keystone

Reduce the lower width Reduce the upper width

Settings

Picture mode (Analog RGB input, digital RGB input)

Bright:

Set the picture with its brightness priority.

True color: Set the picture with its quality (color) priority.

Lamp power

Hi:

Set the lamp mode with brightness priority.

Low: Restrict the lamp output to reduce the cooling sound.

Auto. demo (Memory card input)

On:

When a memory card is detected while the memory card
input mode is selected, a slide show using the image data in
the root directory starts automatically.

Shutter (Document imaging camera input)

Set to the frequency (50/60 Hz) of the power supply in your area.

Note

The cooling sound changes according to the temperature inside the projector.  When the
lamp power setting is changed, the brightness changes immediately, but the cooling sound
level does not change immediately.

Continued

(Main unit side)

When selecting “Contrast”, “Brightness”, “Color”, “Phase”, “Keystone”, “Picture mode”,
“Lamp power”, “Auto. demo” or “Shutter” in step 2.