Toshiba 37BV700B Manual Do Utilizador
English - 12 -
Initial Installation - Digital & Analogue
Before switching on the television put your decoder and media recorder to Standby if they are connected
and ensure the aerial is connected to your television. To set up the television use the buttons on the remote
control as detailed on page 4.
Connect the mains plug and switch the TV into
1.
standby using the side On/Off switch. Press
any numbered or standby button on the remote
control, then the language selection menu will be
displayed. This screen will appear the fi rst time
that the television is switched on and each time
the television is reset.
By pressing the
any numbered or standby button on the remote
control, then the language selection menu will be
displayed. This screen will appear the fi rst time
that the television is switched on and each time
the television is reset.
By pressing the
2. Up or Down buttons highlight the
language you want to set and press OK button.
Afterwards, active antenna selection menu screen
Afterwards, active antenna selection menu screen
3.
is displayed. You can set active antenna mode as
on or off by using Left or Right buttons.
on or off by using Left or Right buttons.
If an active antenna is connected to your TV, you
can select this option as On. Antenna power should
be Off when standard antenna is used instead of
the active antenna. See Confi guration Menu in the
following sections for more information.
can select this option as On. Antenna power should
be Off when standard antenna is used instead of
the active antenna. See Confi guration Menu in the
following sections for more information.
Press
4. OK button to save active antenna
preference. Afterwards, the following message will
be displayed on the screen:
be displayed on the screen:
Select Yes by using
5. Left or Right buttons and
press OK to continue. The Auto tuning screen
will appear and the television will start to search
for available stations. The progress bar will move
along the line. You must allow the television to
complete the search.
After Automatic Search is completed, the following
will appear and the television will start to search
for available stations. The progress bar will move
along the line. You must allow the television to
complete the search.
After Automatic Search is completed, the following
6.
message asking for analogue channel search
appears on the screen. Select Yes by using Left
or Right buttons and press OK to continue.
appears on the screen. Select Yes by using Left
or Right buttons and press OK to continue.
Select your Country, Language and Text language
7.
by using navigation buttons. Press OK or RED
button to continue. To cancel, press the BLUE
button.
button to continue. To cancel, press the BLUE
button.
Note :
For proper functioning of digital teletext in DTV
•
mode, you should set country as UK in analogue
AUTO PROGRAM (for UK broadcasts only).
Do not turn off the TV while initializing fi rst time
AUTO PROGRAM (for UK broadcasts only).
Do not turn off the TV while initializing fi rst time
•
installation.
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 12
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 12
02.12.2010 11:03:07
02.12.2010 11:03:07