Toshiba VX1A00011000 Manual Do Utilizador
16
HLC56 (E/F) Web 213:276
Chapter 3: Using the remote control
Preparing the remote control
for use
for use
Your monitor’s remote control can operate your monitor and
many other devices such as cable converter boxes, satellite
receivers, VCRs, DVD players, and HTIBs (home theater in a
box), even if they are different brands.
many other devices such as cable converter boxes, satellite
receivers, VCRs, DVD players, and HTIBs (home theater in a
box), even if they are different brands.
If you have a Toshiba device:
Your monitor’s remote control is preprogrammed to operate
most Toshiba devices (- page 20).
most Toshiba devices (- page 20).
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:
that the remote control is not preprogrammed to
operate:
You can program the monitor’s remote control so it will
operate the other device (- pages 18–22).
operate the other device (- pages 18–22).
Installing the remote control
batteries
batteries
1
Remove the battery cover from the back of the remote
control.
control.
2
Install two “AAA” size batteries, making sure to match
the + and – signs on the batteries to the signs on the battery
compartment.
the + and – signs on the batteries to the signs on the battery
compartment.
3
Reinsert the battery cover in the remote control until the
tab snaps.
tab snaps.
Caution: Never throw batteries into a fire.
Note:
• Be sure to use AAA size batteries.
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
new ones.
• When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
battery types or use new and used batteries in combination.
• Always remove batteries from the remote control if they are
dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.
extended period of time. This will prevent battery acid from
leaking into the battery compartment.
Remote control effective range
For optimum performance, aim the remote control directly at
the monitor and make sure there is no obstruction between the
remote control and the monitor.
the monitor and make sure there is no obstruction between the
remote control and the monitor.
Squeeze tab
and lift cover.
and lift cover.
16.4 ft (5m)
Point remote control
toward remote sensor
on front of monitor.
toward remote sensor
on front of monitor.
263237HLC56_EN.book Page 16 Monday, June 5, 2006 3:46 PM