Toshiba TLP-X21Y Manual Do Utilizador

Press the INPUT button repeatedly to select it.
The icon of the input source selected appears.

(You can select “Camera” when using the model with a document
imaging camera.)

Continued

 (Signal sent from the computer)

• If you project an image from a computer with an LCD screen while monitoring the image on

the computer, the image may not be projected properly, depending on the computer model.
In this case, turn off the computer display. For details on controlling the computer display, etc.,
refer to the computer’s manual and description on the software for the computer used.

• The projector projects an image by XGA signal (1024 x 768) in full screen.
• The projector projects an image by VGA or SVGA signal in full screen size, the image quality

may be slightly degraded. But, when you set the “Screen size” in the menu screen 

 to

“Thru”, the display size will be reduced without the image quality be degraded.

• The projector has simplified display compatibility with the signals whose picture dots are more

than that of XGA signal. (However, letters and lines can be inequal or a part can be missing.
Some signals may not be projected at all.)

• It is recommended to set an external monitor connected to the computer to XGA mode (1024

x 768).

• The projector can be also applied to DDC2B (Display Data Channel 2B). If your computer is

applied to the DDC, start up your computer after turning on the projector.

Note

The types of input sources selected when the INPUT button is pressed repeatedly can be
set from the menu screen. 

(At shipping from factory, the projector is set so that the RGB signal source input to the
COMPUTER IN 1 connector and the video signal source input to the VIDEO jack can be
selected.)

(Main unit side)