Toshiba 20VL64 Manual Do Utilizador

ENGLISH-17-

Selecting the picture mode
You can select your desired picture type from four 

picture modes: 1, 2, 3, or M.
To select the picture mode:
• Using the remote control

Press 

 on the remote control repeatedly until 

a preferred mode is selected.

• Using the on-screen display menu

1. Press MENU, and then press /  until the 

Picture menu appears.

2. Press  to highlight Picture Mode and press 

/  to select a preferred mode.

Adjusting the picture quality
If you are not satisfied with the preset picture 

quality, you can additionally adjust the picture 

contrast, brightness, colour, and sharpness levels 

based on a selected picture mode.

To adjust the settings:

1. In the Picture menu, press  /  until the 

item you want to adjust is highlighted.

2. Press  /  to adjust the level.

3. To continue adjusting the other items, repeat 

step 1-2.

The changes you make in the picture settings will 

be stored to the 

M mode

.

TINT: When an NTSC video signal is connected 

to EXT1, EXT2, EXT3 or EXT3-S, you can adjust 

the colour tint setting. If you do not connect this 

type of video, then the TINT option will not be 

available on the OSD menu.
There are more advanced settings open for 

adjustment: Black Stretch, Noise Reduction, 

Colour Temperature. To adjust the advanced 

settings:
4. In the Picture menu, press  /  until 

Picture Advanced Setting is highlighted.

5. Press   or OK to display the Picture 

Advanced Setting page.

6. Press  /  until the item you want to 

adjust is highlighted and press  /  to 

adjust the level.

7. To continue adjusting the other items, repeat 

step 6.

When the selected input signal is PC, the 

following functions will not be available: Colour, 

Sharpness, Tint, Black Stretch, and Noise 

Reduction.
To reset the picture settings:

In the Picture > Picture Advanced Setting menu, 

press  to highlight Picture Reset and press  or 

OK to return all of the picture settings to the 

default values of 

1 mode.

P

EXIT

MENU

Picture 

Mode

 

 

Contrast

lower

higher

Brightness

darker

lighter

Colour

paler

deeper

Sharpness

softer

sharper

Tint

reddish

greenish

 

 

Black Stretch (increases the 

strength of dark areas of the 

picture)

Low, Middle, 

High, Off

Noise Reduction (adjusts the 

noise reduction strength)

Low, Middle, 

High, Off

Colour Temperature (selects a 

preferred color temp.)

Normal, 

Warm, Cool

20VL64-en.book  Page 17  Thursday, February 1, 2007  5:06 PM