Toshiba 36ZD26P Manual Do Utilizador

15

ADDITIONAL FEATURES

AV connections and input selection

Defining your INPUT and OUTPUT sockets so that your television recognises connected equipment.

Again, from the 

select 

.

Using the S or R buttons change the 

option to:

MONITOR = The picture on screen
TV = The last television programme selection.
EXT 1 = The picture from equipment connected
to Scart 1.
EXT 3 = The picture from equipment connected
to Scart 3 or the side input sockets.

Selecting the OUTPUT signal for Scart 2

Selecting the INPUT signal

This feature allows you to specify the type of signal going
into Scarts 2 (EXT 2) or 3 (EXT 3) on the back of the
television and the sockets on the side (which are also 
EXT 3). Please refer to the manufacturers instructions for
the connected equipment.

From the 

select 

and

with the S or R button select either AV or S-VIDEO
as the required 

for 

and 

. 

If the colour is missing try the alternative setting.

This feature enables you to select the source to 

from Scart 2. e.g. If you connect a stereo decoder to

Scart 1 and a stereo video recorder to Scart 2, and

select EXT 1 as the 

output (i.e. you will output

the signal received through Scart 1 directly out to

Scart 2), you will be able to record the stereo decoder

transmission in stereo.

Most video recorders and decoders send a signal
through the Scart lead to switch the TV to the correct
Input socket. Alternatively press the external source
selection button 

B

repeatedly until you see the picture

from your equipment. You must use this button to view
equipment connected using the COMPONENT VIDEO
INPUT (EXT 4).

An 

e.g. 

, indicates the input is set for an 

S-Video signal.

Press the 

B

button to bring up EXT 1 on the

screen. This will display the signal coming in
through Scart 1. 

Press the 

B

button again to select the equipment

connected to Scart 2 (EXT 2).

And press the 

B

button again for EXT 3 

(Scart 3, 

I

, on the back of the TV or 

J

, 

on the side of the TV) and again for EXT 4
(Component Video Input).

To return to TV mode simply press one of the
numbered buttons on the remote control. 
To view the external equipment once again, 
simply press the 

B

button until you see your

external source.

Input Selection