Toshiba 32L4300 Manual Do Utilizador

117

 

 

Settings are not saved if the BACK button is pressed before Done is 

selected.

The settings configured in Wireless Setup can be confirmed.

Press the QUICK button.

Select Wireless Information, and then press the OK button.

Press the RED button to check the availability of surrounding APs.

A Wireless Information screen appears when a connection is 

successfully made.

Status

The message, “Connected” appears when the TV is connected to 

the AP  

The message, “Disconnected” appears when the TV is disconnected 

from the AP

Signal

Connection signal strength with the AP (STRONG/MEDIUM/WEAK)

Speed

The link speed with the AP

Mode

Working mode (11a, 11b, 11g, 11n)

Channel

The channel in use (1-165)

Network name

SSID set

Authentication 

Authentication set

Encryption

Encryption set

Security key

Security Key set

AP MAC address

The AP’s MAC address appears when the TV is connected to the AP

TV MAC address

The TV’s MAC address

DHCP

The message, “Enabled” appears when you use DHCP.  

The message, “Disabled” appears when you do not use DHCP.

IP address

The TV’s IP address

Subnet Mask

Value of the Subnet Mask

Default Gateway

Default GATEWAY’s address

DNS

DNS’s address

 

 

Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or 

TKIP, the Speed value might be low. We recommend that the Encryption 

setting are changed to AES (Under manual setup).