Toshiba 37RV52RZ Manual Do Utilizador

Chapter 6: Using the TV’s features

2無

Highlight

Digital Audio Selector and press

Digital Audio Selector
Audio Settings
Advanced Audio Settings

Audio

Audio Setup

3無

Press

to select

Audio, and then press

to select the desired service.

4無

Press

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows
you to output high-fidelity stereo sound. MTS
also can transmit a second audio program (SAP)
containing a second language, music, or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the
word “STEREO” or “SAP” appears on-screen when

is pressed.The MTS feature is only available

for analog signals on the

ANT/CABLE input.

To listen to stereo sound:

1無

Press

and open the

Audio menu.

2無

Highlight

Audio Setup and press

3無

In the

MTS field, select Stereo.

4無

To save the new settings, highlight

Done and

press

To reset the settings to the factory defaults,
highlight

Reset and press

Note:

• You can typically leave the TV in Stereo

mode because it will automatically output

the type of sound being broadcast (stereo

or monaural).

• If the stereo sound is noisy, select Mono to

reduce the noise.

To listen to an alternate language on an

ATSC digital station (if available):

Highlight the

Language field in step 3 above, and

then press

to select the language you prefer.

To listen to a second audio program on an

analog station (if available):

Select

SAP in step 3 above.

Note:

• A second audio program (SAP) can be heard

only on those TV stations that offer it. For

example, a station might broadcast another

language as a second audio program. If you

have SAP on, you will see the current program

on the screen but hear the other language

instead of the program’s normal audio.

• If you have SAP on and the station you are

watching is not broadcasting a second audio

program, the station’s normal audio will be

output. However, occasionally there is no

sound at all in SAP mode. If this happens, set

the MTS feature to Stereo mode.

Adjusting the audio quality

You can adjust the audio quality by adjusting the
bass, treble, and balance.

To adjust the audio quality:

1無

Press

and open the

Audio menu.

2無

Highlight

Audio Settings and press

3無

Press

to highlight the item you want to

adjust (

Bass, Treble, or Balance).

4無

Press

to adjust the level.

• t

makes the bass or treble weaker or

increases the balance in the left channel

(depending on the item selected).

• u

makes the bass or treble stronger or

increases the balance in the right channel

(depending on the item selected).

5無

To save the new settings, highlight

Done and press

. To reset the settings to the factory defaults,

highlight

Reset and press

Selecting the optical audio output

format

You can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio system to the

Optical

Audio Out terminal on the TV (see “Connecting a

digital audio system” on page 18).

To select the optical audio output format:

1無

Press

and open the

Audio menu.

2無

Highlight

Audio Setup and press

3無

In the

Optical Output Format field, select either

Dolby Digital or PCM, depending on your device.

4無

To save the new settings, highlight

Done and press

. To revert to the factory defaults, highlight

Reset and press