Toshiba 32AV600E Manual Do Utilizador

Página de 36
27
Connecting your TV
•  This TV is only operable with L-PCM on 
32/44.1/48 kHz and 16/20/24 bits. If there is 
no sound when using HDMI, use the analogue 
audio cables to connect the TV and the HDMI 
device, and select Analogue in HDMI audio of 
the AV connection menu (
- page 28).
•  This TV is able to connect with HDMI devices. 
But it is possible that some HDMI devices may 
not operate properly with this TV.
Connecting an HDMI and a DVI device
The HDMI input on your TV receives digital audio 
and uncompressed digital video from an HDMI 
device and uncompressed digital video from 
a DVI device. This input is designed to accept 
HDCP programme material in digital from CEA-
861-D compliant consumer electronic devices 
(such as a set top box and DVD player with 
HDMI and DVI output).
The HDMI input is designed for best performance 
with 1080i (50 Hz/60 Hz) and 1080p (50 Hz/60 
Hz) high-defi nition video signals, but will also 
accept and display 480i, 480p, 576i, 576p, 720p 
(50 Hz/60 Hz) and VGA signals.
•  HDMI: High-Defi nition Multimedia Interface
•  DVI: Digital Video Interface
•  HDCP: High-bandwidth Digital Content 
Protection
•  CEA-861-D compliance covers the 
transmission of uncompressed digital video 
with high-bandwidth digital content protection, 
which is being standardized for reception of 
high-defi nition video signals. Because this is 
an evolving technology, it is possible that some 
devices may not operate properly with the TV.
•  E-EDID: Enhanced-Extended Display 
Identifi cation
•  Acceptable PC signal format:
S-VGA: VESA 800 
5 600 @ 60 Hz
XGA: VESA 1024 
5 768 @ 60 Hz
W-XGA: VESA 1280 
5 768 @ 60 Hz
W-XGA: VESA 1360 
5 768 @ 60 Hz
S-XGA: VESA 1280 
5 1024 @ 60 Hz
•  L-PCM: Linear-Pulse Code Modulation
Note:
HDMI, the HDMI logo, and High-Defi nition 
Multimedia Interface are trademarks or 
registered trademarks of HDMI Licensing, LLC.
Connecting an HDMI device
One HDMI cable (type A connector)
VIDEO
AUDIO
L
R
IN
OUT
HDMI OUT
TV back view
HDMI device
For proper operation, it is recommended that you 
use a short HDMI cable.
HDMI cable transfers both video and audio.
Connecting a DVI device
One HDMI (type A connector)-to-DVI adapter 
cable and audio cables
VIDEO
AUDIO
L
R
IN
OUT
DVI
OUT
TV back view
DVI device
TV back view
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-
DVI adapter cable should not exceed 3m. The 
recommended length is 2m.
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only 
video. Separate analogue audio cables are 
required.
323742AV550ETY_EN.indd   27
323742AV550ETY_EN.indd   27
3/19/2009   11:06:19 AM
3/19/2009   11:06:19 AM