Toshiba 37HLC56 Manual Do Utilizador

Página de 46
39
HLC56 (E/F) Web 213:276
Chapter 6: Using the Monitor’s features
Setting the On timer
To set the On timer to turn on the monitor 
automatically:
1
Press Y and open the Timer menu.
2
Press B or b to highlight On Timer.
3
Press the Number buttons (0–9) or B or b to enter the 
length of time until the monitor turns on automatically.
You can set the On timer in 10-minute increments, up to 
12h50m (12 hours and 50 minutes).
4
Press O to start the timer.
5
Press p to turn off the monitor.
The monitor will turn on automatically after the length of 
time you set in the On timer.
Note:
• When a power failure occurs, the On timer settings may be 
cleared.
• To display the amount of time remaining on the On timer 
(while the monitor is still on), press 
E.
Displaying the monitor’s settings 
on-screen using RECALL
To display the monitor’s settings on-screen:
Press E on the remote control.
The following information will display on-screen 
(if applicable):
VIDEO mode selected
Remaining time of On/Sleep timer (if set)
Video label (if set)
V-Chip rating status
Picture size
To close the RECALL screen:
Press E again.
Understanding the last mode 
memory feature 
If the power is cut off while you are viewing the monitor, 
the Last Mode Memory feature automatically turns on the 
monitor when the power is resupplied.
Note: You should unplug the monitor’s power cord if it is 
possible that you will be away from the monitor for an extended 
period of time after the power is restored. This will prevent the 
monitor from turning on in your absense.
On Timer
Sleep Timer
Timer
MENU
Back
Watch TV
EXIT
00:00
10:30
Full
TV-PG
On Timer
1 0 h 3 4 m
Sleep Timer
    1 h 2 3 m
Video 1      
VCR
263237HLC56_EN.book  Page 39  Monday, June 5, 2006  3:46 PM