Toshiba 32dt2u Manual Do Utilizador

Sound problems

 

•

Check the antenna/cable connections ( Chapter 
2).

 

•

The station may have broadcast difficulties. Try 
another channel.

 

•

The sound may be muted. Press 

VOLUME.

 

•

If you hear no sound, try setting the 

MTS feature 

to 

Stereo mode ( page 37).

 

•

If you are not receiving a second audio program 
from a known SAP source, make sure the 

MTS 

feature is set to 

SAP mode ( page 37).

 

•

If you hear audio that seems “incorrect” for the 
program you are watching (such as music or a 
foreign language), the SAP mode may be on. Set 
the 

MTS feature to Stereo mode ( page 37).

Remote control problems

 

•

Remove all obstructions between the remote 
control and the TV.

 

•

The remote control batteries may be dead. 
Replace the batteries ( page 20).

 

•

If the TV still does not act as expected, use the 
Reset Factory Defaults procedure ( page 27).

Channel tuning problems

 

•

The channel may have been erased from the 
channel  memory by the 

automatically feature. Add the channel to the 

channel memory ( page 25).

 

•

The channel may be blocked by the 

LOCK 

feature. Unblock the channel ( page 41).

 

•

If you are unable to tune digital channels, check 
the antenna configuration ( page 24). If you 
are still unable to tune digital channels, clear all 
channels from the channel list and reprogram 
channels into the channel memory ( page 24). 
If you are still unable to tune digital channels, 
use the Reset Factory Defaults procedure ( 
page 27). Also see “TV stops responding to 
controls” and “Other problems” ( page 51).

Closed caption problems

 

•

If the program or video you selected is not 
closed-captioned, no captions will display ( 
page 35).

 

•

If text is not available, a black rectangle may 
appear. If this happens, turn off the closed 
caption feature ( page 35).

 

•

A closed-caption signal may not display 
correctly in the following situations: a) when 
a videotape has been dubbed; b) when the 
signal reception is weak; or c) when the signal 
reception is nonstandard ( page 35).

Rating blocking (V-Chip) problems

 

•

If you forget your PIN code: While the PIN code 
entering screen is displayed, press 

 four times 

within 5 seconds. The PIN code you previously 
stored will be cleared ( page 38).

No REGZA-LINK

®

 operation

 

•

The REGZA-LINK

®

 feature is available for 

Toshiba REGZA-LINK

®

 compatible devices.

 

•

Make sure the HDMI cables with the HDMI 
Logo (

) are used.

 

•

When the connected REGZA-LINK

®

 device 

does not work correctly after you have changed 
settings of the device, turn off your TV and 
unplug the power cord, then plug and turn on 
again.

 

•

If several devices are connected, REGZA-LINK

®

 

feature may not operate properly.

 

•

Read the instruction manual furnished with the 
connected REGZA-LINK

®

 device.

HDMI problems

 

•

Make sure to use cables with the HDMI Logo  
(

) ( page 13). 

 

•

Some legacy HDMI sources may not work 
properly with the latest HDMI TV products due 
to new standard adoption.

Media Player problems

 

•

Make sure that devices are connected correctly.

 

•

Incorrect behavior may occur with a USB HUB 
connection.

 

•

Photo files that were processed and edited by 
using the PC’s application software may not be 
able to be viewed.

 

•

The TV may select one format automatically and 
play it when contents that support two or more 
formats are played.

 

•

Confirm contents of USB storage device are 
formats that correspond with this TV ( page 
43).