Toshiba 55S41U Manual Do Utilizador
19
Chapter 2: Connecting your TV
Connecting a digital audio system
The TV’s
DIGITAL AUDIO OUT terminal outputs a
Dolby
® *
Digital
or 2-channel down-mixed
PCM (Pulse-Code Modulation) signal for use with
an external Dolby
an external Dolby
®
Digital decoder or other external
audio system with optical audio input.
You will need:
•
•
Optical audio cable (Use an optical audio cable
that has the larger “TosLink” connector and not
the smaller “mini-optical” connector.)
that has the larger “TosLink” connector and not
the smaller “mini-optical” connector.)
Dolby Digital decoder or
other digital audio system
TV back panel
To control the audio:
1無
Turn on the TV and the digital audio device.
2無
Press
on the TV’s remote control and open the
Sound menu.
3無
Highlight
Audio Setup and press
.
4無
In the
Optical Output Format field, select either
Dolby Digital or PCM, depending on your device
(“Selecting the optical audio output format” on
page 39).
(“Selecting the optical audio output format” on
page 39).
Note:
• Some audio systems may not be compatible
with Dolby Digital bitstream signals. Older
audio systems that are not compatible with
standard optical out signals may not work
properly, creating a high noise level that
may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR
WARRANTY.
• The DIGITAL AUDIO OUT terminal may not
output some digital audio sources because
of copy restrictions.
* Manufactured under license from Dolby
Laboratories. Dolby, and the double-D symbol are
trademarks of Dolby Laboratories.
trademarks of Dolby Laboratories.
Connecting an audio system
This connection allows you to use external speaker
with an external analog audio amplifier to adjust the
level.
with an external analog audio amplifier to adjust the
level.
You will need:
• standard audio cables
LINE IN
L
R
(continued)
TV back panel
Analog audio amplifier