Toshiba 32CV510U Manual Do Utilizador
17
CV510U (E/F) Web 213:276
Chapter 2: Connecting your TV
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby
®
*
Digital g or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby
modulation) signal for use with an external Dolby
®
Digital
decoder or other external audio system with optical audio
input.
input.
You will need:
•
optical audio cable (Use an optical audio cable that has the
larger “TosLink” connector and not the smaller “mini-
optical” connector.)
larger “TosLink” connector and not the smaller “mini-
optical” connector.)
To control the audio:
1
Turn on the TV and the digital audio device.
2
Press
Y on the TV’s remote control and open the Audio
menu.
3
Highlight Audio Setup and press
T.
4
In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device
(
Dolby Digital or PCM, depending on your device
(
-
“Selecting the optical audio output format” on
page 45).
Note:
• Some audio systems may not be compatible with Dolby
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are not
compatible with standard optical out signals may not work
properly, creating a high noise level that may damage
speakers or headphones. THIS DAMAGE IS NOT COVERED
BY YOUR WARRANTY.
compatible with standard optical out signals may not work
properly, creating a high noise level that may damage
speakers or headphones. THIS DAMAGE IS NOT COVERED
BY YOUR WARRANTY.
• The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
* Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Laboratories.
Connecting an audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
external analog audio amplifier to adjust the sound level.
You will need:
•
standard audio cables
To control the audio:
1
Turn on the TV and the stereo amplifier.
2
Turn off the TV’s built-in speakers (
-
page 44).
Note: To hear sound when using an external audio amplifier,
the volume of both the TV and the amplifier must be set to a
reasonable listening level.
the volume of both the TV and the amplifier must be set to a
reasonable listening level.
LINE IN
Optical
Audio IN
L
R
Dolby Digital decoder or
other digital audio system
other digital audio system
TV upper back panel
Audio Settings
Digital Audio Selector
Audio Setup
Audio
Done
Audio Setup
Language
Reset
MTS
Stereo
English
Speakers
On
Dolby Digital
Optical Output Format
HDMI 1 Audio
Shared Analog Audio
HDMI 1
Auto
Dynamic Range Control
Compressed
Dolby Digital
LINE IN
L
R
Analog audio amplifier
TV upper back panel
32_37CV510U_EN.book Page 17 Friday, February 22, 2008 5:40 PM