Toshiba ZP38 Series Manual Do Utilizador
17
Dolby Digital
Delay time
1
2
3
4
5
Dolby Digital is available from DVD players, some games console players, etc. These must be connected
using a Scart or phono lead for the picture and an optical or a coaxial cable for the sound.
using a Scart or phono lead for the picture and an optical or a coaxial cable for the sound.
Dolby Digital
1/0 = Centre speaker only.
2/0 = Front Left and Front Right only.
2/1 = Front Left and Front Right +
1/0 = Centre speaker only.
2/0 = Front Left and Front Right only.
2/1 = Front Left and Front Right +
Rear Left and Rear Right combined.
2/2 = Front Left and Front Right +
Independent Rear Left and Independent
Rear Right.
Rear Right.
3/0 = Front Left and Front Right and Centre.
No Rear Speakers.
3/1 = Front Left and Front Right and Centre +
Rear Left and Rear Right combined.
3/2 = Front Left and Front Right and Centre +
Independent Rear Left and Independent
Rear Right.
Rear Right.
Arrange the speakers as shown on page 6 then set up
the TV as follows:
the TV as follows:
If the rear speakers and seating are a long way from the
TV, the sound from the rear speakers will reach you
before the sound from the front. A higher setting in the
Delay time option can restore the correct balance.
TV, the sound from the rear speakers will reach you
before the sound from the front. A higher setting in the
Delay time option can restore the correct balance.
Connect the DVD to the TV using phono leads to
the COMPONENT VIDEO INPUT or a Scart lead
to EXT 2, and an optical or coaxial cable to to the
optical/coaxial sockets, DA-1 or DA-2.
the COMPONENT VIDEO INPUT or a Scart lead
to EXT 2, and an optical or coaxial cable to to the
optical/coaxial sockets, DA-1 or DA-2.
Set the Digital input-1 in the AV connection
menu (see page 16) to EXT 2 if Scart 2 is used or
EXT 4 if the equipment is connected to
COMPONENT VIDEO INPUT.
menu (see page 16) to EXT 2 if Scart 2 is used or
EXT 4 if the equipment is connected to
COMPONENT VIDEO INPUT.
If external front speakers are connected the
External speaker switch on the back of the TV
must be set to EXT (see page 6). The centre
channel will not be heard without external front
speakers connected.
External speaker switch on the back of the TV
must be set to EXT (see page 6). The centre
channel will not be heard without external front
speakers connected.
Make sure the rear speakers are connected, then
in the Feature Menu press Q to select
Surround set up. Use R to set the Rear speaker
in the Feature Menu press Q to select
Surround set up. Use R to set the Rear speaker
option in the Surround set up menu to YES.
Press Q to select Surround out and set the
option to SP OUT (Surround speakers out).
option to SP OUT (Surround speakers out).
1
2
3
Select Surround set up from the Feature menu.
Select the Delay time option, use Sor R to adjust
the setting to a suitable value.
Press EXIT to finish.
Sound adjustment
1
2
3
4
Surround set up
Back
Rear speaker
Rear speaker
YES
Surround out
SP OUT
Surround test
Delay time
Delay time
Surround set up
Back
Rear speaker
Rear speaker
YES
Surround out
EXTERNAL
Surround test
Delay time
Delay time
If the Rear speaker option is set to NO, no
sound will be heard from the rear speakers and
the Surround out option will not be selectable.
sound will be heard from the rear speakers and
the Surround out option will not be selectable.
If an external amplifier is to be used to power the
surround speakers set the Surround out option to
EXTERNAL.
surround speakers set the Surround out option to
EXTERNAL.
No sound will come from the surround sound
terminals if this option is chosen.
terminals if this option is chosen.
Set the volume and balance of the front speakers.
Play a Dolby Digital film and press
M
on the
remote control. The Surround menu will appear
giving an indication of the channels available e.g.
Dolby Digital 3/2 (see the table).
giving an indication of the channels available e.g.
Dolby Digital 3/2 (see the table).
Press P and Q to select the speakers, then use
S or R to adjust. The number of adjustable
speakers will depend upon the signal received
from the DVD player.
from the DVD player.
Press EXIT to finish. Alternatively select Surround
test in the Surround set up menu.
test in the Surround set up menu.
In order to get full Dolby Digital the DVD
player must be connected using the coaxial
or optical links.
player must be connected using the coaxial
or optical links.
K7815 32/36ZP38B 17/3/03 3:49 pm Page 17