Toshiba 19LV611U Manual Do Utilizador

Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz).

Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC 

MONITOR on the rear of the TV/DVD. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, 

connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC AUDIO IN jack of 

the TV/DVD. You can also connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the audio cord. If 

you use HDMI-to-DVI cable, please connect audio cord as same way as VGA cable.

Select “PC” by pressing INPUT repeatedly (When you use HDMI cable, Select “HDMI”).

Switch on the computer. The TV/DVD can operate as the computer monitor

Monitor Display modes
MODE Resolution

Refresh 

rate

VGA 640x480

60/72/75Hz

VGA

720x400

70Hz

SVGA

800x600

56/60/72/75Hz

XGA

1024x768

60/70/75Hz

WXGA

1280x768

60Hz

WXGA

1280x720

60Hz

WXGA

1360x768

60Hz

Press INPUT again.

The on-screen displays will have a different appearance in PC mode than in TV mode.

If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV/DVD-screen.

•

•

VGA cable (not supplied)

To HDMI IN

To PC IN

Audio cord (not supplied)

HDMI-to-DVI adapter cable (not supplied)

This connection allows you to use external speakers with an external audio amplifier to adjust the sound level.

Turn on the TV and the stereo amplifier.

Turn off the TV’s built-in speakers (see “Turning off the built-in speakers” on page 

.)

Note: To hear sound when using an external audio amplifier, the volume of both

the TV and the amplifier must be set to a reasonable listening level.

To AUDIO OUT (L/R)

To AUDIO IN

or

To HDMI 1/PC AUDIO IN

52G0101A P14-29.indd   20

52G0101A P14-29.indd   20

1/5/09   3:02:57 PM

1/5/09   3:02:57 PM