Toshiba 42AV500U Guia Do Utilizador

Chapter 6: Using the TV’s features

H-Position:
Moves the picture left/right.
The adjustment range is -50~+50 (default value is 0).*
V-Position:
Moves the picture up/down.
The adjustment range is -10~+10 (default value is 0).*
Clock:
Helps to reduce noise and sharpen the picture.
The adjustment range is -10~+10 (default value is 0).*
Phase:
Helps to reduce noise and minimize periodic vertical
stripes on the screen.
The adjustment range is -15~+16 (default value is 0).*

The default settings may vary depending on the input signal

format.

Setting the PC Audio

If the INPUT source is set to PC. The PC IN audio phone jack
is applied for PC IN when PC IN terminal is connecting with
an analog RGB cable. ( page 19)

Note: Because the PC Audio input is shared with HDMI 1.
If

INPUT source is set to “HDMI 1

,”And the HDMI 1 signal

is DVI format. This PC Audio input will apply for HDMI 1.
(Also see item 2 on page 11.)

•

Setting the sleep timer

You can set the sleep timer to turn off the TV after a set
length of time (maximum of 90 minutes).

To set the sleep timer using the remote control:

Press

on the remote control to set the length of time until

the TV turns off. Repeatedly press

to increase the time in

30-minute increments, to a maximum of 90 minutes.

To set the sleep timer using the on-screen menus:

Press

and open the

Prefer menu.

Highlight

Sleep Timer.

Press  or

to increase the time in 30-minute

increments.

Off30 Min60 Min90 MinOff

Note: When a power failure occurs, the sleep timer setting
may be cleared.

To display the remaining sleep timer:

Press

on the remote control or same as above process

using the on-screen menus.

To cancel the sleep timer:

Repeatedly press

until it is set to Off.

1�

2�

3�